Jump to content
SAU Community

Recommended Posts

R32 GTR Apexi pods and adapters in good condition, very clean. $160

20052008587nd6.jpg

20052008588wf0.jpg

R32 GTR stock headlights- $250 pair

17042008513yv3.jpg

R32 GTR front/rear calipers and rotors/lines. $300

15042008504nl4.jpg

R32 GTRstock front strut brace, in ok condition has marks on it (needs polish)- $80

R32 GTR stock rear bar (gunmetal grey, good condition_ - $100

R32 GTR stock rear wing (Gunmetal grey, has a few marks)- $100

R32 GTR stock fuel pump- $100

R32 GTR stock ECU- $100

R32 GTR stock 440cc injectors- $250.

R32 GTR stock 65mm AFM's $200 pair (near new, 6 months old)

All located in Melbourne, west suburbs.

Pick-up preferred, postage extra $

Link to comment
https://www.sau.com.au/forums/topic/220827-r32-gtr-parts-cheap/
Share on other sites

Hey mate..

Ill take both R32 GTR front and rear strut braces..

can I see a pic?.. Are they the adjustable ones?

Willing to post to Syd?

Pm me

Edited by GTS4WD

My contact number is 0415-998-244 for anyone interested in the parts. First come first serve basis.

Also have a q45 afm with plug and a R32 GTR power FC and commander now for sale. Links below.

q45 afm

R32/r33 power FC

Tai

R32 GTR Apexi pods and adapters in good condition, very clean. $160

20052008587nd6.jpg

20052008588wf0.jpg

R32 GTR stock headlights- $250 pair

17042008513yv3.jpg

R32 GTR front/rear calipers and rotors/lines. $300

15042008504nl4.jpg

R32 GTRstock front strut brace, in ok condition has marks on it (needs polish)- $80

R32 GTR stock rear bar (gunmetal grey, good condition_ - $100

R32 GTR stock rear wing (Gunmetal grey, has a few marks)- $100

R32 GTR stock fuel pump- $100

R32 GTR stock ECU- $100

R32 GTR stock 440cc injectors- $250.

R32 GTR stock 65mm AFM's $200 pair (near new, 6 months old)

All located in Melbourne, west suburbs.

Pick-up preferred, postage extra $

Please call Ed 0411392676 Re injectors

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...