Jump to content
SAU Community

Recommended Posts

i know first hand what its like before and after a remap going from stock 33 ecu to r32 ecu remapped, tuned by jeff, and there was MORE low down and more driveability.

dont listen to what everyone has to say about VCT... it doesnt do sweet f**k all really.

would luv to see wat your ecu would do in my car. just not gunna bother doin mine as im sellin the car shortly

  • 10 months later...

i no its old topic, but im also thinking about getting my stock r32 ecu chip reprogrammed... but $500 sounds kinda lot of $$ since for that money i can almost get greddy emanage. are those pre-programmed eprom chips u find on ebay any good lol?

Edited by Rocky88
i no its old topic, but im also thinking about getting my stock r32 ecu chip reprogrammed... but $500 sounds kinda lot of $ since for that money i can almost get greddy emanage. are those pre-programmed eprom chips u find on ebay any good lol?

Dont get a pre programed one from Ebay mate...since when did Ebay stuff became trust worthy...IMHO i dont think $500 to get it flashed isnt expensive...its the most vital part of your car and your longevity of your motor mate...so really your call...

I have heard off Jeff at Turbo tune doing these and apparently they are really good tunes etc...give him a call and find out mate....i also dont think he charges $500

Dont get a pre programed one from Ebay mate...since when did Ebay stuff became trust worthy...IMHO i dont think $500 to get it flashed isnt expensive...its the most vital part of your car and your longevity of your motor mate...so really your call...

I have heard off Jeff at Turbo tune doing these and apparently they are really good tunes etc...give him a call and find out mate....i also dont think he charges $500

alright tnx mate... i also wouldn't trust ebay chips lol... god knws what they programmed on those eprom chips...

you probably could get an e-manage with the harness etc for $500 but who in SA will tune it? Last I heard basically no one here knows that much about them and on top of the price for an e-manage you have installation + dyno tune costs.

get all the mods that you want, store them till you have everything, get it all installed in one go and pussy it to a tuner for the r32 computer remap and tune for $500... then be done with it and enjoy it. :banana:

Edited by tx3_90
you probably could get an e-manage with the harness etc for $500 but who in SA will tune it? Last I heard basically no one here knows that much about them and on top of the price for an e-manage you have installation + dyno tune costs.

get all the mods that you want, store them till you have everything, get it all installed in one go and pussy it to a tuner for the r32 computer remap and tune for $500... then be done with it and enjoy it. :banana:

you can get a nistune addon which only costs around $200 for the addon and $200 for the licence... the main thing it does however is allow for realtime tuning... no needing to burn roms and insert them... the addon needs to be soldered in there, so you'd need to find someone competent however there are more than a few people in adelaide that can do it. The guys at morpowa and boostworx are endorsed by the manufacturer and my own mechanics @ Road & Track can get it done too.

http://www.nistune.com/

-D

Edit - Jeff from Speedlab uses these too

Edited by Dohmar
you can get a nistune addon which only costs around $200 for the addon and $200 for the licence... the main thing it does however is allow for realtime tuning... no needing to burn roms and insert them... the addon needs to be soldered in there, so you'd need to find someone competent however there are more than a few people in adelaide that can do it. The guys at morpowa and boostworx are endorsed by the manufacturer and my own mechanics @ Road & Track can get it done too.

http://www.nistune.com/

-D

Edit - Jeff from Speedlab uses these too

thanx, looks interesting.. i'll see simon @ morpowa about it. can that thing also remove 180 speed limit and fuel cut?

but yea soldering wouldnt be problem cause im electro-engineer lol

Matt the guy behind Nistune lives here in SA, he'll be able to solder it like he did mine in person

The 180 speed limit cut you can change with the software to anything you want

Edited by Moodles2
  • 2 weeks later...
if anyone needs it i have a remapped chip for RB25det to suit a r32 ecu which can be used in a r33 or for the rb25det in 32.

Hey Carl is that to suit a series1 or series 2 33. Might be interested maybe :woot:

James if you want to keep your VCT then i would suggest on the lines of getting a VG30/300zx ecu wired to suit your R33 mate...if you go to a R32 ecu then you loose your VCT which apparently helps low-mid range

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...