Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by PHaT MR30

Jap drifting is about being 90 degrees to the corner. before, during and after the corner.

doing a skid round a corner and kicking the back end out is not drift

no its not jap drifting is pointing the nose of the car at the exit angle of the turn. drifting can be done by 6 different methods.

1) E-brake

2) Shift-lock

3) braking

4) Fainto

5) Power over

6) Dynamic

if you really REALLY want to know and want to buy a kick ass DVD you should get the Speacial edition Best Motoring Drift Bible it is bad ass. Keiichi Tsuchiya is teaching you how to properly drift

"funkymonkey" when does it stop being a drift and become a powerslide. it becomes a power slide when you loose traction after the turn has passed, if you slide and hold it anywere before during or just before the end or the corner is drifting, you could use power sliding for drifting also you can power slide one way and when you regain traction it tosses you to the other direction and you use that as a "Dynamic" drift it is really simple after you watch that Video its cool shit.

Originally posted by cowboyb

I just thought drifting was losing traction whilst doing a corner and regaining control from the slide before to slide into a curb...I guess I could be wrong, since I dont drift myself :D

That's pretty much what all the ppl that try to be heros on the city roads do... and that's so not drift... and then they go "aw man did you check that mad drift I just pulled?"
  • 9 months later...

ok, i've seen those tutorial vids too. And it's a load of crap how everyone suddenly goes off using all these terms that the japs use, such as 'e brake' lol, like WTF? i think you mean handbrake?

I agree that these habibs that do fully sick schidds around the corner are not drifting. The idea with drift is put the wheels out of traction while still being in control. I notice that some of you guys reckon that it is not a drift if you are not pointing out before the corner. It is a much safer way to learn drifting by just bringing the back out once in the corner, and working with that first. it gives you an idea of countersteering to regain control. I started like that in the rain. Much less chance of spinning your whole car around or mounting the kerb.

ok, i've seen those tutorial vids too. And it's a load of crap how everyone suddenly goes off using all these terms that the japs use, such as 'e brake' lol, like WTF? i think you mean handbrake?
Yeah that annoys me too, but E-brake is an American term, in the video they mix in the term "side brake" which I presume is a Japanese transliteration...

Well, to me powersliding has always seemed out of control. Where-as with a drift you've still got control of the car as sideways as it is.

I.e. powersliding to me is when the car is sideways, with all four wheels doing absolutely nothing in the way of forward momentum or directional changes. And that its a power slide and your about to hit a pole;)

Who knows, thats how I've always seen it. I know that you can get into slides with power to carry through corners etc, and I don't call that drift.. Alot of cars here flick the ass out coming out of a corner and say, see that drift.. Or fishy it up the road with minor angle on the car and say whoa drifted that.

Whereas its more like, wow, you glorified a chirp.. Let me see you keep that fishy going around the next two corners without killing yourself.

I see drift as a form of powersliding with the occasional need to the handbrake.

Powersliding is more brute power that sends your 'power' sliding out of a corner.

To myself Powersliding is exactly that.. 'Power' 'Sliding' Using power to create a slide, not like drift that some times uses the handbrake or a touch of the brake pedal to help hold the slide a little longer.

Essentially Drifting is powersliding to a certian extent BUT powersliding is not drifting.

If your looking out the drivers side or passenger side window to see where the f**k your going for more than a couple of seconds without spinning or overcorrecting... your drifting :P

sideways is sideways it just comes down to how long you can hold it like that... (directly proportional to the size of your balls)

If your looking out the drivers side or passenger side window to see where the f**k your going for more than a couple of seconds without spinning or overcorrecting... your drifting :P

sideways is sideways it just comes down to how long you can hold it like that... (directly proportional to the size of your balls)

LOL! excellent. :(

Funky, this is drifting...

http://www.carmode.net/carmode/movi...06file/yv86.wmv

Justin, reason you say/see idiots drifting poorly in Skylines is because they haven't setup the car properly and the car is too heavy to start with...plus who drifts in Skylines anyway except for Nomu! Not that it can't be done just not as elegant and sustained with a lighter car and sufficent horsepower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
×
×
  • Create New...