Jump to content
SAU Community

Recommended Posts

I might be on re-runs but could a someone please tell me if its simply a matter of cutting the right wire [which is?] in an r 34 gtr to diable the 180 klm speed limiter. I Know it has been covered with regard to 32 and 33's i am just wondering if it was the same in the 34's.... cheers

Edited by Duncan1
Link to comment
https://www.sau.com.au/forums/topic/221243-r34-gtr-180-speed-limiter/
Share on other sites

i dont think you can jsut cut a wire. but can i ask why would u want to remove the 180km so badly? do you do alot of track work? or is it just a street car?

if ur planing to mod your car in the future just hook up a power fc

i dont think you can jsut cut a wire. but can i ask why would u want to remove the 180km so badly? do you do alot of track work? or is it just a street car?

if ur planing to mod your car in the future just hook up a power

Yeah i agree and will get a pfc in the not too distant future, but i will wait till i can afford a few more things like injectors, turbo's etc then get it tuned hopefully just the once. Yes the idea is to track the car at qld raceway and the mt cotton hillclimb [180 not a chance there!!]

If the car is mostly stock the power fc can be installed and used with the factory map, Its just slightly tweaked versions of the standard ecu maps. Mine has been running fine on the factory map for 12 months now.

Thanks mate,

Not such a bad idea, i know if i had a pc i would want a tune straight away though!!! viscious circle!!! :blink:

just cut the wire leading to the flux capacitor

You Guys are hilarious.....and so informative!! :woot: lol. Looks like i might have to get a pfc, cause i reckon this will end up being a gee up and i will end up cutting the wrong wire!!!!!

You can do anything you want to your car - cut wire 53, use Homebrand motor oil, clean and reuse the spark plugs etc.

FFS - you've laid out plenty for this vehicle and you want to take shortcuts?? If you want to exceed 180km/h, obviously you want to use the performance that the car is capable of.

Fit and tune a PFC. The whole excersize shouldn't cost you more than $2k, of which you will recoup half of this if/when you eventually sell the PFC.

You can do anything you want to your car - cut wire 53, use Homebrand motor oil, clean and reuse the spark plugs etc.

FFS - you've laid out plenty for this vehicle and you want to take shortcuts?? If you want to exceed 180km/h, obviously you want to use the performance that the car is capable of.

Fit and tune a PFC. The whole excersize shouldn't cost you more than $2k, of which you will recoup half of this if/when you eventually sell the PFC.

Apreciate your sentiment Gav, but lets be realistic, by-passing a 180kmh speed limiter is quite different to running a car on homebrand oil, and the car is essentially stock so i feel Nissan's computer is probably more than capable of doing the job sufficiently well. If there are no negatives i.e Hicas shutdown, then i would be happy to cut a wire. so mate if you can help, that would be great.... :woot:

I don't have a wiring diagram for a BNR34, but I would say there's a better than 50/50 chance that the signals from that wire are used for more than just the speedcut function in the CPU.

UAS has an HKS Speed Limit Defender advertised on their site for $280.

http://www.uniqueautosports.com/pricelists/pricelist_hks.htm

Give that a go if you don't want to commit to a PFC and tune at this stage.

I don't have a wiring diagram for a BNR34, but I would say there's a better than 50/50 chance that the signals from that wire are used for more than just the speedcut function in the CPU.

UAS has an HKS Speed Limit Defender advertised on their site for $280.

http://www.uniqueautosports.com/pricelists/pricelist_hks.htm

Give that a go if you don't want to commit to a PFC and tune at this stage.

Thanks mate, appreciate your help. will take a look...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...