Jump to content
SAU Community

Recommended Posts

any suspension which allows you to lower your car below the legal limit is considered illegal, be it threaded coilovers or groove's and clips style.

I remember years ago when i had to take my sprinter through regency i had threaded coilovers in it, i raised them right up and the right height was pretty decent. I got knocked back and told to weld my locking collar and spring platform to the sleeve to prevent adjustability.... Apart from the fact you cant weld alloy to steel, i wasnt going to f**k my stuff up and just put stock susp in there.

the fact of the matter is, Im all for ADR's and compliance, but they way they go about enforcing them in SA is a f**king joke. QLD has a much better method ( i lived there for a while and bought my ae86 up there) where you can modify you car, and then MOD plate it and have it signed off as legal. If you get pulled over all the cop has to do is check that the mods on the car and the plate match up... and your on your way.

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3907646
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

yeah, only prob is that Aust Design Rule applies in QLD to.

Having a Mod plate will at least stop constant visits to Regency for a mod that is legal but they have the same rules as we do.

Or do what I do. Get an engineers certificate. Like I do for most of my project cars.

Cops generally leave you alone when you have too much paperwork to give them a headache.

Except for the time I got defect outside AIR. Showed the traffic cops my Engineers Cert and they still defect me for tyres (90% tread) because they couldn't touch anything else. Had to go for something piss weak. Got the defect off next day at the local cop shop when I complained about the unfairness ... the sergeant agreed with me. No charge. :D

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3907733
Share on other sites

Yeah I had a similar situation with the bike. For the 1st 10 months they would drive behind me for a km or so then peel off but in the 11 mth I got pulled over 3 times in a fortnight. I explained that I have engineers papers but its too much to carry with me on a bike all the time. I didn't get defected but he was correct in saying that there is nothing to stop me from further mods that are not included in the engineers report

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3907821
Share on other sites

engineers cert isnt worth the paper its written on IMO.

a cop will still send you to regancy, as it is their job to find out if your car currently conforms to the standard on the engineers cert, even if its perfectally 100% legal your still out of pocket 130 bucks + your time and stuff around of going to regency.

and dont say that "ops generally leave you alone when you have too much paperwork to give them a headache" becasue they wont care either way, they just fill out the defect form like they would for any other car.

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3907954
Share on other sites

engineer reports wont pass a defect station because cops see it as if you have any mods that dont suit S.A road rules then its a defect. Reports are only good for regency and they do pass without a prob unless you have modified emission then thats when big dollers and alot of research comes into it. It's $700 for emission test at regency and if you dont pass then thats $700 down the drain, plus you have to pay engineer's and thats not cheap for emissions law.

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3908019
Share on other sites

the fact of the matter is, Im all for ADR's and compliance, but they way they go about enforcing them in SA is a f**king joke. QLD has a much better method ( i lived there for a while and bought my ae86 up there) where you can modify you car, and then MOD plate it and have it signed off as legal. If you get pulled over all the cop has to do is check that the mods on the car and the plate match up... and your on your way.

we can only hope this will be enforced some where down the track. whats the cost involved in getting shit engineered for that though? if its anything like it is here in SA ud probably look at quite a few k just to get a lightly modified car engineered.

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3908126
Share on other sites

i spend 1500 bucks on engineers reports when building my ac cobra and i still had a 6 month argument with regency pk .

i was running straight lpg on a 302 windsor out of a mustang i had to run a air pump but no v8 on australian made cars had too . i had to run cat converters even tho they do jack shit on lpg .

and the biggest laugh that took all the time was they said i had to run a charchol canister its straight lpg there is no place to connect the fkn thing into . after 6 months regency said i could apply for a exemption to run without it .

the engineer wrote to regancy on my behalf explaining the cannister wasent needed they ignored him .

the guy doing the gas wrote to regency saying you could not connect one they wrote back saying fit one or else lol.

never have i had to deal with such a mob of fwits in my life

so in my experince engineer reports in sa are as useless as tits on a bull

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3908620
Share on other sites

Yeah I had a similar situation with the bike. For the 1st 10 months they would drive behind me for a km or so then peel off but in the 11 mth I got pulled over 3 times in a fortnight. I explained that I have engineers papers but its too much to carry with me on a bike all the time. I didn't get defected but he was correct in saying that there is nothing to stop me from further mods that are not included in the engineers report

Love your bike,

Kept recording it every time we drove past you in the supra. That night was so cold!!

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3908671
Share on other sites

NEVER EVER ARC UP WITH A COP YOU WON"T WIN.............

You can, and do win. I've debated with cops over traffic/defect matters and gotten off. Its how you do it, and how smart you are in getting your point across.

I think this is developing into a sad world: where you try to do the right thing by the cops (engineers certificate/racing or drifting at the race track), yet they will still go out of their way to nick you anyway. There's our reward for doing the right thing. Then on the other side of the coin, you get people who just give up and don't even try to debate the point. When you're busted fair and square speeding or whatever, yeah cop it sweet and pay the fine. But when you know you're being nicked for no reason at all, don't lie down.

Link to comment
https://www.sau.com.au/forums/topic/221391-defected/page/4/#findComment-3911749
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...