Jump to content
SAU Community

Recommended Posts

just changed my dashboard cluster globes with leds tonight and thought I'd clean up that clear plastic cover that covers all the gauges .. Turns out the stuff can't be cleaed. Looks like someone had sprayed some sort of clearning detergen over the clear cover and didn't wipe it off and it just won't come off ... like the plastic is ruined (although it feels smooth on touch)

Anyway was wondering if there are any skyline wreckers in sydney ? This is for an R34 GTT... or if anyone has any suggestions on what to try and clean this crap off with, I'm all ears. I've tried standard detergent, alcohol etc and the stains won't budge

Link to comment
https://www.sau.com.au/forums/topic/221545-skyline-wreckers-in-sydney/
Share on other sites

give it a cut and buff we used to do it all the time

cause when we had dashes out at panel shops the idiot beaters used to spill all kinds of shit on em (brake, fluid thinners, etc, etc)

quick wet sand with some 1500 and then run the buff over it and it should be fine

Ok I've tried 5 different cleaners and none seem to be able to get rid of this crap (even tried Maguires ScratchX .. which btw is a useless product - doesn't do crap on paint scratches either)

Abo Bob, is it unblemished and fits a GTT ? If so, do you want to sell it and if so how much? :thumbsup:

Ok I've tried 5 different cleaners and none seem to be able to get rid of this crap (even tried Maguires ScratchX .. which btw is a useless product - doesn't do crap on paint scratches either)

Abo Bob, is it unblemished and fits a GTT ? If so, do you want to sell it and if so how much? :thumbsup:

Forget the cleaner products they won't work.

Follow Dahtone Racing's instructions and you will find your cluster will be fine.

Wet sand with 1500 as he said.

Then polish it.

Don't bother with cleaners.

Ok I've tried 5 different cleaners and none seem to be able to get rid of this crap (even tried Maguires ScratchX .. which btw is a useless product - doesn't do crap on paint scratches either)

Abo Bob, is it unblemished and fits a GTT ? If so, do you want to sell it and if so how much? :P

Maguires ScratchX worked fine on my headlights to get rid of the yellow haze, though I used it to buff out scratches left behind by 2000 grit abrasive paper.

Wet sand with 1500 as he said and hand polish with Maguires's plastic polish (can't remember the name)..

ScratchX mentioned earlier will work as a plastic polish, but I believe Maguires PlasticX is what your thinking about :)

can someone just quickly explain to me what 'wet sanding' means ... just what it says ie. poor water over the plastic whilst sanding it ? What does this achieve?

You keep the item you are sanding and the paper wet. It makes the sand paper less abrasive and therefore leaves finer scratches. The idea of sanding is to start with a more abrasive paper and finishing off with a polish. In English you sand the big lumps off first and work your way down to the small ones :D

Try Brasso buy it from supermarkets. Have used it for years to clean perspex, polishes alloy wheels perfectly. Don't waste your money with the fancy named brands- try it you won't be dissapointed-its cheap.

You may need to use wet and dry if you panel is badly marked-I would use 2000 then brasso.

headlight repair kit to fix what ? the yellow headlight haze someone mentioned or the clear cluster plastic ??

To do either, esentially its doing the same thing. Making plastic go from that dirty opaque look to a clean clear look by removing layers of plastic. I have to tell you though to patient with it. Results aren't instant and the longer you take polishing them up the better they will look. :)

Try Brasso buy it from supermarkets. Have used it for years to clean perspex, polishes alloy wheels perfectly. Don't waste your money with the fancy named brands- try it you won't be dissapointed-its cheap.

You may need to use wet and dry if you panel is badly marked-I would use 2000 then brasso.

Damn! Why didn't I think of Brasso :) I'll have to keep that in mind for when my headlights get eventually yellowed again and I run out of ScratchX :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
×
×
  • Create New...