Jump to content
SAU Community

Recommended Posts

I thought it was the other way around - you can put the plenum/multiple throttle bodies onto the manifold if you drill some extra holes for mounting. That'd be a lot easier than drilling holes into the head.

just get a custom front facing or greddy plenum and run a 90mm throttle - it'd be alot easier and probably around the same money. Just look up JimX's custom front facing intake photos

oh, and nice to see a few more ppl from skylines stockholm joining us on the forums! welcome! :)

Hi guys, the RB26 inlet system goes..................

plenum > throttle bodies > inlet manifold > head.

The RB26 head has different bolt patterns, port sizes and water jacket spacing to a RB25 head. So the RB26 inlet manifold won't fit on an RB25 head.

If you want to know more, there are thousands of previous posts on this subject, do a search.

Originally posted by Ronin 09

just get a custom front facing or greddy plenum and run a 90mm throttle - it'd be alot easier and probably around the same money. Just look up JimX's custom front facing intake photos

oh, and nice to see a few more ppl from skylines stockholm joining us on the forums! welcome! ;)

Ok, will consider that to. any direkt links mayby ? =)

Thanks man. Wery nice forum you lads have :)

Wiktor

Originally posted by Sydneykid

Hi guys, the RB26 inlet system goes..................  

plenum > throttle bodies > inlet manifold > head.

The RB26 head has different bolt patterns, port sizes and water jacket spacing to a RB25 head.  So the RB26 inlet manifold won't fit on an RB25 head.

If you want to know more, there are thousands of previous posts on this subject, do a search.

Hmm too bad cus the complete intake with plenium, throttlebodies and inled manifold just lie to no use in the garage. thougt i it would fit i could get rid of that stupid piping straigth over the engine an turbo..

but will the RB26 throttle bodies fit the RB25 Inlet manifold then..

Desperate to get down the intake temp. it's now really high.

and sorry searched but could just find that the GTR plenium wouldn't fit nothing more specific.

Wiktor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...