Jump to content
SAU Community

Recommended Posts

are your wheels done up tight?

sadly though this often happens with spacers. the best best is just buy the correct offset wheel and bin the spacers.

spiggots/hub rings will cure that problem, spacers are great for increasing track but bad for this problem and a few others.

you can screw them till the studs break it wont cure the problem, and no a wheel alignment wont help either.

if your im melb give me a buz/pm i can make them up for you ....

sometimes you have to get them made up.

yes some tyre places will have them, but make sure they are a tight fit, there should be no movement when the wheel is on, NO movement other wise you will have the same problem again.

bryyy- your one of the lucky ones :)

Edited by robbieraver

it should do. sorry I just assumed your bolt on spacers have that little 'lip' in the middle to locate the wheel. if not then that is almost certainly why you are having these problems as it's pretty hard to locate the wheel dead centre without the hub ring on the spacer.

if it doesn't look like this, it's not good.

20mm-hub-spacer.jpg

but they do make the wheels stick out a LOT so if your already filling out your guards.........

if your wheel is a standard ID then you can buy off the shelf spiggots for like 20 schmux

i needed custom cause ssr professor sp1's have a weirdo 79mm ID :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...