Jump to content
SAU Community

Recommended Posts

are your wheels done up tight?

sadly though this often happens with spacers. the best best is just buy the correct offset wheel and bin the spacers.

spiggots/hub rings will cure that problem, spacers are great for increasing track but bad for this problem and a few others.

you can screw them till the studs break it wont cure the problem, and no a wheel alignment wont help either.

if your im melb give me a buz/pm i can make them up for you ....

sometimes you have to get them made up.

yes some tyre places will have them, but make sure they are a tight fit, there should be no movement when the wheel is on, NO movement other wise you will have the same problem again.

bryyy- your one of the lucky ones :)

Edited by robbieraver

it should do. sorry I just assumed your bolt on spacers have that little 'lip' in the middle to locate the wheel. if not then that is almost certainly why you are having these problems as it's pretty hard to locate the wheel dead centre without the hub ring on the spacer.

if it doesn't look like this, it's not good.

20mm-hub-spacer.jpg

but they do make the wheels stick out a LOT so if your already filling out your guards.........

if your wheel is a standard ID then you can buy off the shelf spiggots for like 20 schmux

i needed custom cause ssr professor sp1's have a weirdo 79mm ID :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
    • ok. Yea, then I would need to remove the turbo and weld an adapter on to it instead, if I fuc* this one up.  
×
×
  • Create New...