Jump to content
SAU Community

Recommended Posts

Hey guys, it's a sad day, decided to let go of my pride and joy build. too many other things to worry about.

I'm not sure really what to ask as I have put so much into it and I realise its unfinished so no one wants to pay top dollar..meh its a forum, no one wants to pay top dollar full stop.

The HKS turbo kit alone to replace new is around $7,000 not to mention the ammount of labour already gone into into the inside and outside of the body.. somewhere close to $10,000 worth if done at a workshop. Then there is the 1jz engine, R154 gearbox, full suspension setup, diff, wheels, electronics, fuel system, asthetics etc...

Chasing around $20,000 ONO. after putting more than double that into it..Also open to swaps for imports that I can just get in and drive. R32/S14/180/86 etc...

Full buildup pictures up to its current state can be found - HERE (inc moulded widebody)

Here are the current specs of what I am offering. (differs to list on other thread)

Chassis Prep; (many many hours of labour)

-Interior completely stripped - (can provide full interior)

-Sound deadening removed - cabin / boot

-Seam welded cabin (re-covered in silicon, painted gloss black)

-Seam welded engine bay and strut towers (painted gloss black after tons of smoothing with fillers etc)

-Recessed firewall to shift engine weight back over subframe and fit V-mount setup

Engine Bay Specs ;

-1JZ-GTE (JZX81 Chaser)

-55mm 3 Core custom alloy radiator

-ASE alloy radiator overflow bottle with high pressure cap

-550cc Injectors - USA JZX81

-USA JZX81 Resistor pack

-HKS Camgears

-HKS GT3040 Turbine

-HKS SS Topmount manifold

-HKS 50mm External gate

-HKS Pod filter

-Blitz Oil Cooler

-Blitz Oil filter relocation kit

-Gates racing timing belt kit

-300x600x76 Hybrid intercooler

-Alloy Catch Tank with breather

-Custom FMIC piping / Hoses / Clamps (for original pre-firewall cut setup)

-Full custom 3" exhaust from turbo back to just under floorpan at driver (for original pre-firewall cut setup)

-Custom Driftline semi-solid polyurethane engine mounts

-Custom extended engine brackets (for original pre-firewall cut setup)

Fuel System;

-1.5ltr alloy surge tank

-Walbro 255 in tank fuel pump

-Malpassi rising rate fuel regulator

Drivetrain Specs;

-MA70 Supra R154 5-speed gearbox - Needs a shifter + custom tailshaft

-Custom boxed steel gearbox mount (for original pre-firewall cut setup)

-PBR 4 puck button clutch (brand new in box)

-Modified std handbrake w/drift button

-Zenith tuning hydraulic handbrake setup parallel to std unit

-Mechanical diff

Suspension;

-Tien *HA coilovers - height adjustable / camber adjustable / damper adjustable

-Kazama castor rods

-D-Max rear camber arms

-UAS rear subframe bushes

-Front Strut Brace

-Rear strut brace

-White-line adjustable front sway bar

-White-line adjustable rear sway bar

-Solid alloy steering shaft spacer

Electronics;

-Bee-R Rev limiter

-Battery Isolation switch (Battery in boot)

-Apexi Pen Type Turbo Timer

-Turbosmart Bleed valve

-Standard ECU (atm)

Aesthetics;

-Full BN Sports kit

-Dmax 30mm rear fibreglass guards (Customised to 50mm)

-Aeromaster 25mm fibreglass vented front guards

-Center line removed from body

-Topstage 4 slat fibreglass bonnet vent (moulded into bonnet)

-Ganador copy mirrors

-2x17" Keichii rims w/ Advan neova tread

-2x18" Deep dish garsons 18x10

-25mm bolt on hubcentric titanium wheels spacers

-Cefiro style grille

-Drift racing carbon backed seat

-Bride low mount rail

To finish the car you will need to do the following.

-Wiring $500?

-Tailshaft $400?

-Modify custom mounts $time?

-Put most of it back together. $time?

-Finish bodywork (not much left to do at all just some basic filling and sanding) $time?

-Paint $600

The car has previously been registered but with a modified firewall you will need some hektic mod plating to get it on the road...should be able to be done though.

Located in Deception Bay - QLD

Email me - [email protected] or PM me.

Edited by R32-Drifter
  • 2 weeks later...
  • 1 month later...

Put another day of work into the car today.

New pictures can be found here http://www.nissansilvia.com/forums/index.p...t&p=4312258

we put the new subframe with the UAS bushes, Mechanical LSD, D-max rear camber arms, then we threw the Tien HA coilovers in.

after the work gone into it again its half inspired me to keep it.

Edited by R32-Drifter

If sold this week, will also throw in a Nintendo Wii with 7 games, two controllers, two nunchucks, 1 Wii steering wheel. (over $500 worth)

So thats the 50/60k car package.

Plus over 2.5k worth of spare parts at no extra $

Full Wii console kit $500 odd.

So like, theoretically $5/62,500.00 worth for an amazingly low $20,000.00

I found a car I want to buy so I want this gone as fast as possible before I change my mind again.

This isn't a bump, its a genuine information update post.

Edited by R32-Drifter
If sold this week, will also throw in a Nintendo Wii with 7 games, two controllers, two nunchucks, 1 Wii steering wheel. (over $500 worth)

So thats the 50/60k car package.

Plus over 2.5k worth of spare parts at no extra $

Full Wii console kit $500 odd.

So like, theoretically $5/62,500.00 worth for an amazingly low $20,000.00

I found a car I want to buy so I want this gone as fast as possible before I change my mind again.

This isn't a bump, its a genuine information update post.

Scratch that, now its at the point where its only going to cost around $1,500 to get running so no more crazy deal, im keeping the Wii.

Lol somone buy it..

It's getting even closer now, paints almost complete..just need to spray bonnet/front guards and 1 door...then its back into the mechanical side.

Edited by R32-Drifter
  • 3 weeks later...

car market dead?

also, i cant edit my old posts...but the price drop no longer applys..cars alot closer to done..bit more labour has gone in, plus the car i price dropped for to try and get is gone :(

Edited by R32-Drifter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...