Jump to content
SAU Community

Recommended Posts

Hi all,

Its time to replace my front and rear pads and disks,

so the big question is, what would be the best ones to go with?

the car is my daily, but i do a few track days in a year. so i would probrably go with slotted disks with decent pads.

im also toying with the idea of braded line as well.

any thoughts?

cheers,

matty.

Link to comment
https://www.sau.com.au/forums/topic/222062-good-brakes/
Share on other sites

Brembos buddy!

Get them off a R34 GTR if not a Ferrari F40.

That be my first choice.

Then there is other options like Endless, AP Racing, K Sport and Project Mu make some good brake pads and calipers.

Edited by (00)SKYLINE(00)
Link to comment
https://www.sau.com.au/forums/topic/222062-good-brakes/#findComment-3914142
Share on other sites

Hi all,

Its time to replace my front and rear pads and disks,

so the big question is, what would be the best ones to go with?

the car is my daily, but i do a few track days in a year. so i would probrably go with slotted disks with decent pads.

im also toying with the idea of braded line as well.

any thoughts?

cheers,

matty.

As had been suggested a number of times the list of things to do are:

Don't use DBA 4000 series rotors, find something else. I would suggest Project Mu as they are getting more & more competitive on price.

A decent pad is a Ferodo DS2500. Get them from a proper brake shop & not somewhere like Repco who will just fk you about and confuse themselves. There are a number of other pads sabout which may suit you. Front set is $300 approx.

Get some new fluid. Motul RBF 660 is good/cheap(ish).

Braided lines will help wil pedal feel but aren't strictly necessary. Make sure you get ADR compliant ones. What will help is a master cylinder stopper. Cusco do a nice one.

Lastly the Brembo callipers fitted to Skyline are poverty pack rubbish & in no way worth the kinds of money people ask for them. That is by way of general comment.

Link to comment
https://www.sau.com.au/forums/topic/222062-good-brakes/#findComment-3914155
Share on other sites

How big are your rims?

Could go bigger rotor and get adaptor brackets to suit the nissan caliper. Several companies do them. Global in Japan, or local places. Someone on SAU was at one stage. Have heard this is better than the brembos....True the factory brembos aren't the same as their aftermarket goodies, but hell they look cool and work a treat. :D

Link to comment
https://www.sau.com.au/forums/topic/222062-good-brakes/#findComment-3915158
Share on other sites

Many people spend thousands on a complete brake overhaul but never do something that is cheap and simple - COOLING. Spend a weekend and make up some cooling ducts for your front brakes, it will make a nice difference and cost you hardly anything.

I agree with djr81 in that the skyline brembo's aren't like the racing brembo performance they are the povo pack street car standard and aren't worth what people constantly ask for them (not to mention they are a good 10-15yrs old).

Link to comment
https://www.sau.com.au/forums/topic/222062-good-brakes/#findComment-3915191
Share on other sites

im running P1 buddy club 17 inch rims, so there is plenty of space there.

i think i may make up some cooling ducts for sure.

and i was thinking about getting the RDA slotted and dimpled disks after seeing yours on the weekend mat,

Link to comment
https://www.sau.com.au/forums/topic/222062-good-brakes/#findComment-3916299
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...