Jump to content
SAU Community

Recommended Posts

Australia's fastest GTR is on track to run a 7 sec pass this weekend at the winternationals. With a lazy launch 1.35 60' and wheelspinning on gearchanges the car stopped the clocks at 8.16 and blasted through the traps at 171MPH into a strong headwind. With further setting the car up for the conditions and a better 60' (PB is 1.23) a 7 sec pass is obtainable. Further updates will follow tommorrow night with the 2nd round of qualifing to be held at 7pm.

well done to Mark, Justin, Harry and the team (Julie, Tommi and Ava)

Edited by DiRTgarage
  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Australia's fastest GTR is on track to run a 7 sec pass this weekend at the winternationals. With a lazy launch 1.35 60' and wheelspinning on gearchanges the car stopped the clocks at 8.16 and blasted through the traps at 171MPH into a strong headwind. With further setting the car up for the conditions and a better 60' (PB is 1.23) a 7 sec pass is obtainable. Further updates will follow tommorrow night with the 2nd round of qualifing to be held at 7pm.

well done to Mark, Justin, Harry and the team (Julie, Tommi and Ava)

Very cool - good luck guys :D What tires is it running on now, I am assuming full slicks?

***UPDATE***

Tonight in the 2nd round of qualifing the car ran an Australian record equaling 8.07. MPH was 173 with a better 60' of 1.27

Car was turning the tyres hard off the line but due to the lack of a slider clutch is something that will have to be put up with. Car is unloading the tyres front to rear after grabbing 2nd gear but is running straight as an arrow (unlike sydney where it wanted both lanes)

Lambda readings on the MoTeC show the car is running rich in the air conditions at the track. A harder leaner tune will be tried tomm for a shot at the elusive 7.

stay tuned

Awesome, exciting stuff :D 173mph is certainly getting up there, fingers crossed it can get those extra few mph and a 10th less - would really like to see this car as the next 7s one!

Good luck guys.

right...the 60' was 1.27 so up there but not quite a PB. Mark hit the limiter in 1st so even quicker times are on the cards in the finals tomm. Car was gunbarrel straight and in the groove the whole run with a 1/2 track MPH of 141. MPH shows 7.80's are achieveable in the eliminators tomm.

This makes the car the 3rd fastest GTR in the world and the quickest 2.6ltr RB 26 in the world.

Edited by DiRTgarage
right...the 60' was 1.27 so up there but not quite a PB. Mark hit the limiter in 1st so even quicker times are on the cards in the finals tomm. Car was gunbarrel straight and in the groove the whole run with a 1/2 track MPH of 141. MPH shows 7.80's are achieveable in the eliminators tomm.

This makes the car the 3rd fastest GTR in the world and the quickest 2.6ltr RB 26 in the world.

Awesome! Congratulations! :) look forward to hearing how it goes tomorrow

Just got back from the track. Mark's 7.96 @ 176mph was awesome!!! 60 was good then he banged off the limiter. It ran straight.

I recon closer to 180mph with a high 7.8x tomorrow!!! fingers crossed

CONGRATS TO MARK & TEAM!!!

woooooooohooooooooooooo!!!!!!!!!!!!! bout bloody time!

awesome work and congrats to all involved!

paul what time does he run tomorrow? i'll be out there all day from mid morning on

woooooooohooooooooooooo!!!!!!!!!!!!! bout bloody time!

awesome work and congrats to all involved!

paul what time does he run tomorrow? i'll be out there all day from mid morning on

his first elimination round is at 10.25am

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...