Jump to content
SAU Community

Auto License Driving A Manual Car

UNR33L

By UNR33L,
in Victoria

 Share

Recommended Posts

UNR33L Grand Master

UNR33L

Posted
Posted

hey guys,

As some of you may know i've been looking at getting a new car.

Now when i got my Ps i got a auto license because i already had a auto car but now i'm getting a manual car (I can drive manual) so i was just wondering about the following questions:

-How do i change to a manual license?

-Whats required in the test? (is it just like repeat of test or just a drive around the block?)

-Whats the penalty if you get done for it? or something?

I got pulled over in my GFs manual car and cops just did a license and rego check or something and they didn't say anything about my license being auto.

Any info is appreciated, Thanks.

Link to comment
https://www.sau.com.au/forums/topic/223116-auto-license-driving-a-manual-car/
Share on other sites
doxximus Grand Master

doxximus

Posted
Posted
hey guys,

As some of you may know i've been looking at getting a new car.

Now when i got my Ps i got a auto license because i already had a auto car but now i'm getting a manual car (I can drive manual) so i was just wondering about the following questions:

-How do i change to a manual license?

-Whats required in the test? (is it just like repeat of test or just a drive around the block?)

-Whats the penalty if you get done for it? or something?

I got pulled over in my GFs manual car and cops just did a license and rego check or something and they didn't say anything about my license being auto.

Any info is appreciated, Thanks.

get that shit fixed, next time you mightn't be so lucky.

Dicer Collaborator

Dicer

Posted
Posted
-How do i change to a manual license?

-Whats required in the test? (is it just like repeat of test or just a drive around the block?)

-Whats the penalty if you get done for it? or something?

First of all (as you know) you are not allowed to drive a manual with an auto license. You are allowed to if you have a fully licensed driver with you and you display the 'driver under instruction' sign. You will need to display your P plates in addition.

To answer your questions:

1. Sit the practical test again.

2. Just the same as you did with auto, but with a manual car.

3. I would expect it will be driving without a(n appropriate) license.

Kaz200 Grand Master

Kaz200

Posted
Posted

As far as I know you have to redo your driving test completely, not sure about the time on Ps factor, but I was pulled over once in the last 12 months of my Ps, and they didnt notice.. anyway they've changed so much crap lately you should probably just call them tomorrow and if you're super lucky you will get a correct answer

paulr33 Grand Master

paulr33

Posted
Posted

why not ring vicroads, or go see them, or check on their website?

it would be covered on their for sure.... go look....

but the auto/manual normally only applies on your p's under conditions

look on the back of your licence under conditions, it will have A for auto

on your normal full licence the auto condition should vanish and you can drive whatever

so if you have your full licence, check for the conditions on the back

if you dont, wait till you get your full licence or speak to vic roads on how to retest with manual while on p's

chris_r31 Rising Star

chris_r31

Posted
Posted

for the amount of times i have been pulled by cops not once did they check for tranny..

i am a auto licenced p plater driver but had nothing but manuals since day 1..

do what i did i always had a beenie over my gear nob when i got pulled over, or just do the leagal thing

lol like every1 else has said and re sit the test...

its only a money fine no demerit points as far as i no anyways...

Spunky Munky Grand Master

Spunky Munky

Posted
Posted

Like some have commented already... if you have a auto license and still on your P's, you are not (legally) allowed to drive a manual vehicle as the test you had past was no doubt done in an automatic vehicle. However, when you are off your P's, you can drive any sort of car you want provided that of course you can drive a manual car.

What others have said is generally true - cops often do not check for transmission type of the vehicle that you are licensed to drive - however, a mate of mine was caught out once and was fined $155 and a loss of 1 demerit point if my memory serves me right. So yeah, I would not drive at risk if I were you - alternatively, like you said - just go for the test again, this time apply for a manual license (which of course also allows you to drive automatic vehicles) and take a the driving test again in a manual vehicle. It's as simple as that.

DNGRUS Veteran

DNGRUS

Posted
Posted

When I got my license I went for Auto as well, coz my dad bought me my 1st car and it was auto...

When i bought my own car, i bought a manual. I knew how do drive manual so I just went and re did my driving test.

Took like 10 minutes! U dont have to re-do the one on the computer again, just the driving test.

Was easy. Just call Vic Roads to make ur appointment :)

adznight Newbie

adznight

Posted
Posted

Don't listen to those muppets. It's easy, all you need to do is sit your test again, I had to.

Funny thing is it's eeeeeeasy, so easy in fact I almost failed becuase I wasn't listening and almost missed a turn.

Just book in with a instructor for one brush up, to get rid of those bad habbits then sit the test with them again. Easy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Original window sticker?

      By Watermouse · Posted

      I got a full sheet set of OEM copied stickers to replace all the faded engine bay ones, great quality too.  Came from England. Someone like that should be able to to make u up what u want so long as u have a quality image to show them 🤷🏻‍♂️
    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
×
×
  • Create New...