Jump to content
SAU Community

Recommended Posts

hey guys,

car is going into the shop for some paint approximately three weeks from now...

kit is arriving (or should do) by the end of next week...

so, to cut a long story short;

my car is white (whole car) and i was thinking about doing a typical 'Panda' spec style coordination with my car, the thing is... i don't know what to paint black!!!

i know for certain that my wheels are getting painted black, they are already chrome with a tiny bit of lip and i will leave the lip polished but paint all the spokes, from this;

http://www.californiacustoms.ch/cc/images/z18.jpg

to this;

http://www.fwt.net.au/store/images/P/tn_zinik_z18_blk-01.jpg

my initial idea was to paint the mirrors (already Carbon Fibre Ganadors that i'm picking up tomorrow) black, the Vented Bonnet black and the Bootlid black (not the whole boot, just the top part... kind of like the Mine's R34 GTR) as seen here;

http://images.superstreetonline.com/featur...e_rear_view.jpg

then i thought the car would look funny if the mirrors were black and the roof was white so i thought i might paint the mirrors and the roof black and leave the bonnet and the boot white with the rims still how i want them...

THEN i considered doing the bonnet, roof, mirrors AND boot black and then probably have to do a two tone kind of thing and have the top half of my car black divided by a nice stripe of some sort... (the strip would be above the door handle) possibly airbrushed on, again with the rims still black...

i was just wondering what kind of opinions you could all give me as i would really appreciate what you guys out there think is 'hot' and what is 'not' and before i finish off i KNOW that there will be many comments (maybe less now that i mention it) that the car is mine and i should do it as to how i please but the thing is i'm unsure, all these options have run through my mind and i just want to see how other Skyline enthusiasts weigh up such choices...

all comments will be GREATLY appreciated though i would like to see negative ones at a minimum...

i will state however that the option at the top of my list was my very first thought to just paint the bonnet, bootlid, mirrors and wheels...

(and if it makes a difference at all, i'm still remaining with the URAS kit... mine now is just a bit banged and scratched up and EVERYTHING!)

let the comments begin!

Andrew :ermm:

Link to comment
https://www.sau.com.au/forums/topic/223299-paint-for-autosalon/
Share on other sites

oh about that Rhys...

i think i'll be going to your's, i don't have any tools, or a garage that has enough room to do any work :wacko:

and Hamish... yeah they are CF but i think they will stand out too much (up-close) compared to the black...

if only i could afford CF Bonnet and Boot, then i'd keep it CF but a full time uni student that's just quit their job = no $$$

keep em coming folks

Just seems a bit of a waste to paint over CF Ganadors as they arent actually lighter or anything, its just CF look anyway. But if youre getting em 2nd hand or on the cheap then no harm I guess :wacko:

I reckon paint the rims and if you want then do both the boot and bonnet but definitely dont paint the roof. It might look good on silvia's but I think it looks weird on a 33.

Edited by Yawn

getting brand new ones, super cheap...

everyone is telling me to keep them CF so i think that's what i might be doing...

i drive an R34... has a sharper roof than the R33?

well looks like i might exclude the roof unless i do the top half of the car...

thanks for the opinions Mike, as for everyone else that hasn't commented, please do...

looking forward to seeing what you guys have to say, cheers,

Andrew

That looks sweet, lol, there is a pioneer demo car that is an R34 with a blue top half and white bottom, and has hand painted lines to divide it, if i get the time ill upload some pics

Just seems a bit of a waste to paint over CF Ganadors as they arent actually lighter or anything, its just CF look anyway. But if youre getting em 2nd hand or on the cheap then no harm I guess :banana:

I reckon paint the rims and if you want then do both the boot and bonnet but definitely dont paint the roof. It might look good on silvia's but I think it looks weird on a 33.

i think im possibly with Yawn on this one though, that would look hot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...