Jump to content
SAU Community

Recommended Posts

Where do you want to relocate it to? If it's the boot, I'm pretty sure there was an Auto Speed article on this, or even one in an old HPI magazine. I would have thought this would only be needed for a major engine swap or hidden wiring of a show engine bay. Either way, you are up for one hell of a task and plenty of hours soldering under the hood :wacko:

And before you ask, that was custom made by a user on this site and I havnt come across anywhere that sells them... what you could do is paint the standard one in a color that suits your engine bay! :P

What are you talking about?

The picture posted is one that I have on my car.

And before you ask, that was custom made by a user on this site and I havnt come across anywhere that sells them... what you could do is paint the standard one in a color that suits your engine bay! :)

er you can buy them on uk ebay :)

we've done alot of hidden wiring in engine bays andto be honest there is no easy way to do it.

we basically just split everything, extend it all and run it all inside the car either under the dash or in the glove box

  • 9 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...