Jump to content
SAU Community

Recommended Posts

Street GTR's....w00t :D

Rules

1. Apricot Hill Raceway

2. Unlimited Mods

Cars to be used:

R32 Skyline GTR V-Spec 2

R33 Skyline GTR V-Spec

R34 Skyline GTR V-Spec

R34 Skyline GTR V-Spec 2

If you time is extraordinary then proof (from a digital photo) may be required for your time to be counted.

The closing date for entries will be Sunday the 24th of August.

Good Luck :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/22388-sau-gt3-challenge-3/
Share on other sites

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

christian, would you really want the S-Type when you can modify one quicker???

Cam, I'm thinking EVO's next but a request was made for Street GTR's so we'll let this one be Street GTR's then do another car next from a diff maker

Originally posted by SW20-GT

christian, would you really want the S-Type when you can modify one quicker???

Bro, i can drift around that track with one hand, drunk and asleep in my S-Type than you can drive around it in an R34 GTR Vspec II, Cuz.

Right... I'll be home from work at midday... and I'm going to have a proper go at this one and see if I can get within 5 secs of Weetbix and crew... at least this time I already have a GTR with 1051hp and don't have to save for it!!! LOL.

BRING IT ON.

1:13.406 after 10 laps...

and I didn't stay on the circuit the whole way around...

And I hit the rev limiter...

Come on Weetbix...

Where are ya?

I'm off for a few more laps to put this one beyond doubt!

And Toshi... 1072... me thinks your using a different sort of GTR to the R34 V-Spec II??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...