Jump to content
SAU Community

Recommended Posts

thanks for that steve....looks good on the Dell 22"

Port Adelaide was exactly where I was thinking but trying to find an area with no or very little traffic could be an issue......unless its 4am.

Over a bridge to get that curved effect then photoshop the car out, leaving the stove trails, would be good but you don't want another car crossing while the shutter is still open.

love that shot :P

thanks i would upload the full res pic only its about 6mb......

as for the wheels they were nice till i lent out the car and it had a bang, so there off getting repaired now, god knows what theyll come back like :banana:

Edited by mick-skyline
thanks for that steve....looks good on the Dell 22"

Port Adelaide was exactly where I was thinking but trying to find an area with no or very little traffic could be an issue......unless its 4am.

Over a bridge to get that curved effect then photoshop the car out, leaving the stove trails, would be good but you don't want another car crossing while the shutter is still open.

you dont have to edit it in photoshop mate if the shutter is open long enough theyll just be a stripe :P

how do u get the light trail??

you just use a tripod and a long shutter speed if you look at this one closely

IMG_0106.jpg

youll see that theres a white line on it where i was actually on the way back before the shutter closed.

wow that is trippy! how long till the shutter closes?

wat camera?

i want one! lol

im using a 400d

about 2mins it was open maybe 3

cool.....do you remember what shutter speed you used and what speed the car drove away approx.

shutter speed was 3"2.... drove away at drag launch after sitting for about 30seconds

mick what size n offsets are your cr kai's?

any side on pics that show the angle of the spokes?

wheels are 18" x 9.5 all round offset of 30 i think will have to double check the offset though... let me find a pic...

shutter speed was 3"2.... drove away at drag launch after sitting for about 30seconds

hmm, ok.....so was the shutter open during the 30 secs that you sat there cause I would've thought the car would be visible if that was the case

hmm, ok.....so was the shutter open during the 30 secs that you sat there cause I would've thought the car would be visible if that was the case

it was.... i was tryin to get the lights to be a bit brighter. car would only be still there if i stayed for more then half of the shutter or it was brighter out i think could be wrong though, dont really know why its not...

it was.... i was tryin to get the lights to be a bit brighter. car would only be still there if i stayed for more then half of the shutter or it was brighter out i think could be wrong though, dont really know why its not...

thanks for the info....always good to ask which saves us experimenting too much

best one so far, shame its an old pic lacking a lot of mods. but as strange as it sounds, to get a good pic of ur car, its not about the car. u need to consider background, theme, time of day, locations of the objects in the image, etc. quickly taking a snap in ur driveway after u washed it wont cut it :P

and i managed to take this on a shitty 2mp nokia.

Image033.jpg

btw its not a skyline :banana:

Edited by steveP

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...