Jump to content
SAU Community

Full Dolphin Kit For Sale

pintaline
 Share

Recommended Posts

pintaline Proficient

pintaline

Posted
Posted

i have a dolphin kit for sale from an S2, pearl white, skirts and rear bar are very good condition, a few little scratches but they look fine on the car. they come with all brackets and screws.

the front lip screws onto the bottom of the standard S2 bumper but the lip needs repair, it was in an accident. it's still pretty much together but would be a job for a body shop or someone that really knows what they're doing.

if anyone has a pic of one of these kits, feel free to post up, ill take some pics on the weekend

now i know this is a long shot, but... i would swap this for an S2 dayz kit of any condition, or maybe parts of one. let me know what you have.

this kit would be perfect for someone that already has a good front bar (i think there's a white dolphin front bar and grill somewhere in the fs section)

the kit is in canberra, pick up is better but i can probably help a bit with shipping, as long as you organise it

open to offers.

cheers

D.

Link to comment
https://www.sau.com.au/forums/topic/224155-full-dolphin-kit-for-sale/
Share on other sites
D3RV Collaborator

D3RV

Posted
Posted

Why can't anyone in Perth have a silver dolphin/260 kit for sale.. Urgh!

Sorry pintaline I've got a full silver Dayz S2 kit - but the cost to repair + ship it + paint it probably wouldn't be worth it in the end. =\ =\ =\

pintaline Proficient

pintaline

Posted
  • Author
Posted

i could probably have the lip repaired for the right deal (a full dayz kit is definately the right deal!) i could also include my standard front bar for the lip to bolt to if i was getting a dayz bar

D.

pintaline Proficient

pintaline

Posted
  • Author
Posted (edited)

rear bar lip, side skirts and damaged front bar lip.

pics:

y6laqf.jpgy6laqs.jpgy6laq7.jpg

y6laq8.jpg

y6laq5.jpg

front lip is repairable and all pieces have dolphin on the back.

D.

Edited by pintaline
RubyRS4 Grand Master

RubyRS4

Posted
Posted

PM sent.

If we can work out the repair of the lip and collection/freight I'll take it.

Might be time for me to take a roadtrip :D Do the swap there and then :laugh:

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...