Jump to content
SAU Community

Recommended Posts

  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Yeah I ran at the creek, however even on the racing slicks we where running we had no traction through 1-3rd.. Thus running a very slow 17second pass. However with the new dual stage boost controller, we can run 3bar until we get traction and then run full boost. I rekon we will see some 9 second passes. I might need to get someone else to race the car for me, I dont think I could pilot it that quick.

Duncan might be in a position to help out there.

Once again unable to attend due to drinking/whoring commitments.......mates sisters 21st...mohahahahha ill be "bigging it up" benm stylz....enter the "hunter"......oh well....ill be out of action for awhile also moving into my apartment over next few w/ends so ill be flat out....next time...ey....seem to be saying that alot....pfft i wanna drive...

Ando

btw anyone know any decent dialup isp's? good connections and decent price??? Just need some form of connection till i can get adsl....damn to optus aloowed in apartments...GGGRRRRR

Ando

PS.....sorry for going of topic but hey it went from cruz details to mars bars to brotec..so i thought it would be fitting...lol




  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...