Jump to content
SAU Community

Recommended Posts

Ok, my mechanic says my piggy back is a pain so im after a new engine mangement system for my R33 GTS-T, How about some opinions on what people think is good and what isnt.

Im looking for something that will be able to accept future mods and give me good engine protection.

I also have all work done by a mechanic(yes im lazy).

Also im looking around for good mechanics in the liverpool area of NSW as this is my first vehicle that needs a specialist to service and tune.(ive only owned V8s and Motorbikes in the past).

The motor internals will be standard and i will only be adding bolt ons.

Thanks for any help.

MLR

PS, I wish i had a car with the scarry fast feeling i get with my old 1100 GIXXER (pity it corners like a wet spounge). :D

Link to comment
https://www.sau.com.au/forums/topic/224639-engine-management/
Share on other sites

need to know how you want the car to perform...

if you're only after 200rwkw in an rb25 you could get away with a safc...

250 you could do an emanage

more i'd be going pfc / haltech

As far as I am aware, you cannot retune R33 ECUs.

What about a Wolf V500 - cost is around $2500, installed and tuned. "GHOSTT' - R33, lots of go-fast goodies - pushes 450+ kw at the rear treads. And Australian designed and manufactured.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...