Jump to content
SAU Community

Recommended Posts

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

If it's not too late I'm keen for a set of these HID's in 6000k! I've been umming and arring about it for a while but I'm starting to get sick of how dim my lights seem to be!

I've got a R34 25GT 4DR Sedan...from what I understand I need the H4 and a set of parkers? Are there any other globes I need? High Beam globes? Or would I be fine with just the H4 Hi/Lo?

^^well from what i understand you would need H1 so you better in out side lift your bonnet and see what is written on top of your headlights

yeah i best check...I'm just going to take my lunch break now and I'll check and post back =]

ok..so on the top of my headlamps under the hood it has engraved H1 12V 56W

So I'm assuming I just need the H1 Kit and that there's no Hi/Lo option? Do I need to get anything for the high beam?

Also how much is it now for this kit and parkers?

there is no hi/lo option for H1, the kits are $160ea + $15pr for parkers

whether you want HIDs in your high beam is purely up to you

From what I can tell most people that have HID's generally don't use the High Beams? They seem fairly bright as it is. I guess I might as well get the H1's replaced and then do High Beams later if I see the need.

I'll get a H1 Kit 6000K + Parkers $175.00

I can make payment today as well, PM me if you need me to email a confirmation of payment.

Cheers

Nathan

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...