Jump to content
SAU Community

Recommended Posts

Hey all, Ive had my 93' 33 gtst now for about 2 n half years n its boring me. Ive been waiting for the time n cash to do it up a bit, now i have it(soon).Would this be suitable: 600hp+ turbo, new h/d clutch, f/m cooler, microtech ecu, bigger fuel pump n bigger injectors. What size injectors n pump are suitable? Is there something else i need? Ive got a 3.5" exhuast right through already n thats it, the rest is stock. Ive been out of the scene for a while n need updating if im missing somthing people are putting on to theres these days. This is n still will be daily driver.

Cheers for the feedback.

turbo is too big IMO for stock internals. also wont come on boost until probably 5000 RPM.

biggest turbo I would recommend would be GT35 rated at 500HP, even then would probably be too laggy for a street car.

ok then, apparently this particular turbo i was "gunna" get was an 'ATR45', i dont know anyhting about them or heard of it. Ive been told it was rated at .70 - 600+ hp. It is going to be dyno tuned so wouldnt they be able to do somthing about that then?

How much approx is a gt35 turbo n piping going for?

sorry, you said that would be too laggy aswell. Can any1 gimi as yell on a good turbo n housing (not piping) for me. I want somthing that is going to be strong n powerful that will be worth getting for the other mods im getting

ok then, apparently this particular turbo i was "gunna" get was an 'ATR45', i dont know anyhting about them or heard of it. Ive been told it was rated at .70 - 600+ hp. It is going to be dyno tuned so wouldnt they be able to do somthing about that then?

How much approx is a gt35 turbo n piping going for?

not much you can do to tune it to hit boost earlier.. advance the timing a lil maybe but it can be risky..

that kit looking at $3.5k+

hks gt-rs mate.. or just go hi flow if you want to save a bit for somethings special..

Hope im not sounding too dumb but id like the car to boost up still about wot the stock one does. The hks would do that would it?

Go for a HKS GT-RS or a Garrett GT2860RS (Disco Potato) for a quick street RB25, thats what id do anyway.

You will lose a little bit of low down response, but gain loads of midrange and top end.

Or if you want even more lowdown response, but a bit less top end, just mod and high-flow your current turbo like whistle said.

Have a look in the RB25 dyno thread, thats the best way to work out what you are likley to need to suit ur needs.

Hi there.

I notice your new to the forum.

If you read the Dyno Sticky thread at the top of this section, you'll see results from many various turbo setups.

Golden rule is - more power you want, more lag you get. A 600HP turbo is never going to come on even remotely close to a stock turbo, yuor talking 4500rpm or there abouts

Have a read of the sticky thread, and also the FI Guide (just below it), once you see a setup you like with a turbo that seems to fit what you want, have another search with that turbo. Plenty of threads detailing HKS GT-RS, Garrettt 3071/3076, Trust TD06/TD05 series and so on.

Thanks

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...