Jump to content
SAU Community

Recommended Posts

ey guys need some help on wat do, im stuck.

my next thing on my 33 is to get my exaust done, ive been quoted 1050 dollars for a 3" stainless turbo back exaust? wat does everyone reckon, good price? should i worry about stainless or jst go mild steel? or does any one have ant bolt on kits that i could buy or get from somewhere???

also for my FMIC wat should i do, found a cooling pro kit that connects straight up to the stock intercooler pipes. i dunno wat i wanna do, how easy is it to fit these after market FMIC in the stock front bar of a r33 series 2. Any one have any hints or tips for installing them.

Thanks For the help guys

Adam

Link to comment
https://www.sau.com.au/forums/topic/226415-intercooler-n-exaust/
Share on other sites

Id have a look through the trader section for exhuasts, there are quite a few who supply a wide range of exhausts. As for the cooler, i just fitted my type 2 cooling pro kit. Jenkies had to make custom brackets for it, but other than that, no problems at all!

Sounds like a good price, but does it include a high flow cat? Stainless muffler or resonator? Do you know exactly what it is going to sound like? And what volume it is going to be? If the price difference isn't massive I would go stainless every time, as it will last a lot longer. If you want to be prudent, get them to change over your turbo exhaust housing studs while they do the job - can save you heartache down the track.

I have the cheap-ass JustJap intercooler and it works great. Not sure if it is cooling pro or not. If the one you are looking at hooks up to stock pipes then I would assume not. The big problem with a cooler that joins up to stock pipes, it that it presumably has a long pipe running the length under the intercooler back the the stock pipes - these can hang below the level of your bumper bar. If the one you are looking at doesn't have that pipe, then they are bugger to install - you have to cut a hole in your engine bay wall for the return pipe, lose your air snorkel, and trim your clutch fan blades.

Either way you are almost certainly going to have to trim your reo bar, and will definitely have to trim the inside of your bumper bar, to fit the cooler in. These are not difficult jobs, but not for the faint-hearted either. If you are not pretty strongly mechanically inclined, then I would pay someone to fit it. A pile of SAU people had a go at installing a members intercooler one afternoon recently, and from memory didn't actually complete the project within a day :D

yeah like nightcrawler said! i think i was quoted just under 2k somewhere for exhaust, it included a cat, resonator and a muffler! but it was gonna be abit loud, i think the last r33 they tested was like 96-97 db with the same exhaust! i wanted it quiet so i shopped around and pick up a jazma 3" cat back for cheap as chips! got a 3" xforce front/dump real cheap as well! i then picked up a 3" high flow cat from an r34 for like 50 bucks! but i ended up decating my own cat but all up i spent around $500 on my exhaust system! just shop around if you don't wanna pay that sort of price

as for the fmic! i have never run into one which just fits directly without any modifications! i always ended up bending pipes and adding some on

Sounds like a good price, but does it include a high flow cat? Stainless muffler or resonator? Do you know exactly what it is going to sound like? And what volume it is going to be? If the price difference isn't massive I would go stainless every time, as it will last a lot longer. If you want to be prudent, get them to change over your turbo exhaust housing studs while they do the job - can save you heartache down the track.

I have the cheap-ass JustJap intercooler and it works great. Not sure if it is cooling pro or not. If the one you are looking at hooks up to stock pipes then I would assume not. The big problem with a cooler that joins up to stock pipes, it that it presumably has a long pipe running the length under the intercooler back the the stock pipes - these can hang below the level of your bumper bar. If the one you are looking at doesn't have that pipe, then they are bugger to install - you have to cut a hole in your engine bay wall for the return pipe, lose your air snorkel, and trim your clutch fan blades.

Either way you are almost certainly going to have to trim your reo bar, and will definitely have to trim the inside of your bumper bar, to fit the cooler in. These are not difficult jobs, but not for the faint-hearted either. If you are not pretty strongly mechanically inclined, then I would pay someone to fit it. A pile of SAU people had a go at installing a members intercooler one afternoon recently, and from memory didn't actually complete the project within a day :laugh:

cheers for all the reply guys

as for the quote it was for a 3" stainless dump pipe, that has the 2 seperate pipes for wastegate and exaust gases, a 3" high flow cat, and a 3inch piping while ill keep my cannon at the back, i was wanting it to keep the same/similar sound as it has now as its not to loud and sounds alrite atm, jst need the flow casue it kinda feels restriced at higher rev ranges. I think ill jst try find a FMIC and get soem1 to install it casue cbf tryin to cut the stuff on the inside of the front bar i dont wanna stuff it up.

That price sounds really good for a split dump, high flow cat and 3" stainless right through including install! A stainless split dump is $250-$300 and high flow cat $200-$300 on their own.

That price sounds really good for a split dump, high flow cat and 3" stainless right through including install! A stainless split dump is $250-$300 and high flow cat $200-$300 on their own.

yea well this guy at streamline down at newton, all my mates got there's done there so he said hed do it cheap, plus id had my other cars done there 2

Hey bud, we are located in SA and can supply you with an ISC full intercooler kit for $399, you can also go a Trust spec LS for $679. As for exhausts our jap brand cat backs start from $750 +. We can also supply greddy front/dump pipes etc.

Ryan-0413804117

Edited by ISC-Performance
Hey bud, we are located in SA and can supply you with an ISC full intercooler kit for $399, you can also go a Trust spec LS for $679. As for exhausts our jap brand cat backs start from $750 +. We can also supply greddy front/dump pipes etc.

Ryan-0413804117

Hey Ryan,

Could you please PM me a price for a Greddy front/dump pipe for a 32GTR, im getting new turbos, so looking to upgrade.

Mark at Exhaust Technology did my exhaust on my other cars and you dont need s/steel m/steel is fine he will tell you that anyway spend your money on the rear box nothing cheap china made either go for something like a 3" racing spiral JUN.BL with hi-flow cat no rezy and your 33 will sound awsome i promiss

yea well this guy at streamline down at newton, all my mates got there's done there so he said hed do it cheap, plus id had my other cars done there 2

Nigel does some quality work there at streamline. He usually does all the pipework and fabricating from scratch from what i've seen, which is probably why youve been quoted that much.

I reccomend his work for sure!

He actually worked on my corolla exhaust last weekend after somehow mysteriously blowing the rear muffler :D

Another +1 for Nigel at Streamline.

He fixed up the loose exhaust manifold for my R34 back a few weeks ago, great guy to deal with - seems very genuine and was happy to show me around the car and what he'd be doing, etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...