Jump to content
SAU Community

Recommended Posts

I am just about to have my car repainted and am going a color change. so my wheels will be painted to suit the car.

They are 3 piece an inner and outer and a centre. they are held together with about 60 bolts per wheel and i just had a tyre refitted and they are siliconed together as a seal. I would prefer to hve them powdercoated but am not sure if the silicone will be ok to be coated. what sort of tempratures in powdercoating baked on at?

Powder coat is baked on at about 200-250C

If you are coating the center and lip then leaving them whole will be ok; just remove the tyres, valves, and weights.

If you just want the centers coated then you'll need to split the rims and remove the center.

depends on the 3 piece, if its a sandwiched 3 piece (most non racing wheels) which are outer half, then centre, then inner half then you'll have to bust em apart... racing 3 pieces (VS-XX, Miester, some BBS etc) are centre, then the two halves with the centre bolted to the outside of the rim, these you can get away with not having to split the rims, just unbolt the centre.

either way best to get it done at a mag wheel repair shop (not a tyre shop) as they'll be able to torque the bolts up precisely and so on.

the rims are 9 and 10"

they are bee-R and are not sandwich fit. so i should be able to take the center out without having to split the rim.

hmmm guess i have to decide wither to leave the lip polished or coated. here i go hunting for some pics of wheels :D

taking em apart is no prob :banana: I have air tools and FWRRT FWRRRRT! and they will be apart.

from memory wheel center bolts have to be hand torqued.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean I agree. I've seemingly never had issues and I have RS4's in the rain, but I drive pretty slow in the rain, and I commute around on the street and pretty much never push it. But it's not like you're going to uncontrollably slide off the street with them in the rain. At least here in Aus. And I say this before I drive to Tassie in Winter. AS above, the term "Semi" is a bit of a misnomer. The ContiSportContact7 is also a "Semi" or a "UHP" tyre. It's the same category as an AD09 in any case.
    • These are not semis. None of the tyres in that comparo are semis. They are UHP tyres. Perfectly streetable. I'm on my second set of AD09, after using a couple of sets of AD08R. On the street. Every day. I get 15-20 thousand km out of them, which is perfectly acceptable. They are a really nice tyre to drive on. I have few, if any, complaints.
    • You'd hope, if it came from ACS, that it wouldn't be that.
    • Or the brand new throwout may be unhappy...
    • Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
×
×
  • Create New...