Jump to content
SAU Community

Where To Buy R33 Shocks?

islade

By islade,
in Queensland

 Share

Recommended Posts

islade Rising Star

islade

Posted
Posted

Hey guys,

I bought some lowering springs and chucked them in.

Just realised afterwards that the rear drivers side shock was leaking, i don't know if we damaged it, or it was just getting old.

Anyway, I need to get a new shock absorber.

I don't know anything about these, i'm assuming i would need a pair for the rear, so the sides match each other?

What is good on a budget? I'm not street racing, it's more of just a commuter. R33 Series 1 GTST.

I'm on the Gold Coast :whistling:

Isaac

Link to comment
https://www.sau.com.au/forums/topic/226512-where-to-buy-r33-shocks/
Share on other sites
turbs33 Community Regular

turbs33

Posted
Posted (edited)

Fulcrum quote me 500 ish installed for rear shocks only.. Just ur usual kyb or something...

So you'll be looking at at least 400 elsewhere for new shocks only installed, or probablly 250 -300 for just the shocks and install yourself.

You'd be better off finding some good condition 2nd hand ones for now for 100 bucks or something..

suspension places can rebuild stock shocks too for about 80 bucks a pop from what i understand.

Edited by turbs33
GTRgeoff Grand Master

GTRgeoff

Posted
Posted

Isaak, I also run the Sydneykid suspension in my GTR33. It is an exceptional kit with good ride without compromising handling.

Definitely worth spending a little extra as the car will improve dramatically.

Otherwise, if you want cheaper then Elite32 here in Brissy can help with a set of Teins setup for our conditions and not the rock hard Jap style.

islade Rising Star

islade

Posted
  • Author
Posted
Isaak, I also run the Sydneykid suspension in my GTR33. It is an exceptional kit with good ride without compromising handling.

Definitely worth spending a little extra as the car will improve dramatically.

Otherwise, if you want cheaper then Elite32 here in Brissy can help with a set of Teins setup for our conditions and not the rock hard Jap style.

SydneyKid Suspension definately sounds bitchin', but it's also definately out of my price range :D

I did a member search for Elite32, the closest i could find was EliteR33. Is this who you are talking about?

How do i get in contact?

Isaac

TTT Grand Master

TTT

Posted
Posted

If I were you, I'd just keep my eyes open for late model R33 suspension (say from a 40th anniversary edition R33 series 2 - I think 98 model)

they are the newest old shocks you will be able to get.

For someone looking to replace a leaking shock on a road car that is used for commuting, it's abit silly to be recommending SK's $2K kit or Teins for $1k+

rebuilding the stocker for $80 sounds more up your alley I'd say.

does that make them "good as new" so to speak?

islade Rising Star

islade

Posted
  • Author
Posted (edited)

I've found WW Shock Absorbers in brisbane who will recondition them for $120 a pop, definately sounds like the cheapest way to go :rofl:

Should I just get the broken one reconditioned, or should i do the other rear one as well so they 'match'?

I obviously don't know how rooted the fronts are, is there an easy way to check them? Because if they are totally smashed, i might find an organ i don't use much to sell, and get the front ones done too, beause i believe that is where i would notice a real difference (assuming they are gone).

Is there any other little bits of suspension i might wanna check on/replace while i'm at it. I'm not taking about swapping in coilovers or something, just like bushes or anything else? I don't know anything about suspension (well, until yesterday when i did a strut swap and got myself into this mess!)

Oh, and on my front shocks,there is a little knob , labeled 1 - 5, is 5 harder or softer? What difference does it make?

Thanks for your help guys, as a new guy to this forum, it's great to have access to such a wealth of information and expertise!

Isaac

Edited by islade
islade Rising Star

islade

Posted
  • Author
Posted

I just rang up Performance Suspension on Brisbane Rd, Labrador.

New KYB Shocks (supply only) 170 each rear, 220 each front.

He said it's dodgy to do one side (EG: left or right) but it's fine to do just fronts or just rears.

If it's only 50 more for a brand new one, without the downtime of having to wait while being refurbished, i think i would do that.

Is there anywhere i might find new shocks cheaper?

Isaac

Turbo 33 Proficient

Turbo 33

Posted
Posted
I just rang up Performance Suspension on Brisbane Rd, Labrador.

New KYB Shocks (supply only) 170 each rear, 220 each front.

He said it's dodgy to do one side (EG: left or right) but it's fine to do just fronts or just rears.

If it's only 50 more for a brand new one, without the downtime of having to wait while being refurbished, i think i would do that.

Is there anywhere i might find new shocks cheaper?

Isaac

pm sent

islade Rising Star

islade

Posted
  • Author
Posted

Thanks for all your help guys :)

I should be picking up a pair of second hand rear shocks this afternoon or tomorrow, with plans to install tomorrow.

Once i've put them in, i'll get a wheel alignment, and i should be all good, right? because the car handles like a wet noodle on hard drugs at the moment.

Can i get the alignment done before i put in the good rear shocks (i'm guessing alignment wouldn't be affected by a dodgy rear shock?), because if so, i could get an alignment today so that it's all good tomorrow after i replace the rear shocks.

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

You shouldn't need an alignment as the springs hold the car at the right height, not the shocks.

I always recommend new and improved. When an old shock fails it may have an impact on the springs by working one side too hard and resetting that sides' height. Buying second hand can be as dodgy as they may have been unused for some time and the seals, when not exercised, may fail soon after installation and you are back at square one.

GL though and hope they work fine.

turbs33 Community Regular

turbs33

Posted
Posted

While we are at it any one know a reliable wheel aligner in South Bris somewhere? I work next door to a beaurepairs but the guys there look shady as all buggery, not to mention the ghey cars the drive there.

Dont know if i trust them with the skyline.

And whats a good alignment worth.. Fulcrum $110

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
×
×
  • Create New...