Jump to content
SAU Community

Recommended Posts

hey all,

as the topic states my dipstick keeps blowing out. has anyone ever experienced this?

i had a quick search and nothing came up, also another thing to add is one of my belts is squeeling real bad when i go full throttle, i just had the belts replaced, was thinking that maybe my oil pump is seazing up causing the belts to squeel and excess pressure in the oil gallys,

the dip stick has blown out 2 or 3 times now, its annoying as my engine gets covered in oil everytime it happens, could someone please shed some light on why this could e happening

thanks

mitch

EDIT: forgot to mention its an R33 GTS-t

Edited by weeman1
Link to comment
https://www.sau.com.au/forums/topic/227068-dip-stick-blowing-out/
Share on other sites

had this problem alot... at first it was because my catch can was setup rong.. so sort out your breathers and check if theres too much gunk built up in your rocker cover breathers and baffles...

The squealing on full throttle may be your exhaust manifold gasket.. Thats a common cause that alot of customers complain about when they say "belt squeal"

Also get a leakdown test done and a comp test done.. Because another reason may be too much positive crank case pressure, eg: rings are rooted, ringlands broken, pistons melted.

So thats a rough guideline to follow..

yeah exactly as above, my experience has been that its either

- catch can incorrect

- your engine is f*ked

i'm hoping for your sake that you have recently installed a catch can

if not, its time for a compression test and leak-down test and bring your wallet..

WOW, thanks for that fellas, would never have picked the squeal to be my exhaust manifold, my mate keeps telling me it sounds like ive got a leak there.

LTHLRB: no i dont thrash my car really, im lucky to hit full throttle once or twice a week, ive only got a 5 minute drive to work now so the car probly doesn't even warm up properly anymore, but the problem started about a month ago before i got this job. for the last year ive been doing 100 k's a day up and down the freeway

ive been running 10psi since i got the car, previous owner was running 8, at 10psi it creeps a little to 11psi

with the squeal i thought it would be the belts cause it does it on start up occasionally

does anyone know any good workshops around castle hill/baulkham hills? ive only just moved down here so im still new to the area

yeah i had this problem as well when i first got my car, it kept blowing dipstick out it was caused by a stuffed piston had a hole in it.

is your car still running on all 6? if it is it could be worn rings. Hey if ya want to ya could do a compression test ya self and buy a compression tester from autobarn or supercheap one what screws into your spark plug hole. all ya need is that a pen, paper and ya normal tools to get ya spark plugs out.

If ya want to check if ya piston rings are worn is to put a drop of oil down the spark plug hole, thats called a wet compression test it helps seal in the combustion pressure. good luck man hope its just ya catch can

thanks LTHLRB, what do you use to lube the belts up with? im going to do it this weekend, its too dark when i get home during the week

madevo3: how much is the compresion tester to buy? i think it would be a good investment

ill be checking my rocker cover breathers aswell, i hope thats all it is

thanks again for your help

hi, well i tightened up the belts, that seemed to stop the squeeling, also i found out i have an exhaust leak, im not sure if is from the exhaust manifold or the dump pipe, is there an easy way to tell?

also where would i get the gaskets from? i think i might just change them all

cheers

  • 3 weeks later...
sweet thanx, i thought you could get them there, just wanted to make sure,

when you say they're not cheap, how much do you think they will be?

Don't worry about the gaskets until you find out if you need a new engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...