Jump to content
SAU Community

Recommended Posts

I have most of the interior parts for a R32 GTST. i will be adding more parts up once i pull them out. Most of the bigger stuff i am only willing to do pickup, or i can deliver if its not to far out of my way and for a small fee. If you want anything not on my list shoot my a pm and i'll see if i have it.

Center Dash Vent ~ $60 (i am willing to post this item, at buyers expense)

the vent is in good condition over all. the front surrond is in one piece and all the clips are intact. the only thing wrong with it is one of the horizontal fins has broken off the adjustment bit. it still sits straight and you can adjust it with your finger so it sits straight. See pic.

Passenger Dash Vent ~ $25 (i am willing to post this item, at buyers expense)

this vent is in ok. the the vertical deflector parts have broken off the adjustment bit. the surround is in one piece but the two bottom clips that hold it onto the vent body are broken. but even with them broken it still sat ok in the rest of the dash. See the pics for more detail.

R32 Turbo Timer Loom Universal ~ $15 (i am willing to post this item, at buyers expense)

This loom plugs in between where the ignition barrel plugs in and the main loom. about 200mm from the ignition barrel. Saves you from cutting into you original loom.

R32 Double Din Cd Player Mounting Brackets ~ $10 (i am willing to post this item, at buyers expense)

the two brakets that let you mount a cd player and other din mountable equipment.

R32 Digital Climate Control ~ $50 (i am willing to post this item, at buyers expense)

Standard R32 digital climate control, good condition, all buttons work and unit itself works fine. Comes with the plastic front cover and i can also include the electrical plugs with some of the loom if you want.

R32 Drivers Side Window Controlls ~ $50 (i am willing to post this item, at buyers expense)

the drivers side controlls for the windows and mirrors, all the switches and controlls working.

Power Window Relay ~ $25 (i am willing to post this item, at buyers expense)

The black box located under the door card on the drivers side door that controll both the drivers side and the passenger side window functions. Its out of a 32 but i think a few of the nissan models are the same (S13, R33 maybe).

R32 Instument Cluster ~ $100 (pick up only on this item please, for the moment)

Grey back GTST, Manual, non-ABS model instrument cluster with 129k on the clock. All gauges worked fine and cluster and all mounts are in good condition.

R32 Projector Style GTST Passenger Side Headlight ~ $100 (pick up only on this item please, for the moment)

Headlight in good condition, no damage to glass or mounts.

EBAY Job Short Shifter ~ $25 (i am willing to post this item, at buyers expense)

as it says it an ebay bought C's style short shifter. i had this in my r32 for a couple of months. the little white bush fits in the g/box well.

More to come.

Edited by QWK32
Link to comment
https://www.sau.com.au/forums/topic/227221-r32-gtst-interior-parts-brisbane/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...