Jump to content
SAU Community

Recommended Posts

hey

When i take my car out of park i ususaly have to put my foot on the brake first.

But now i think the switch is broken, ive been trying all morning to take it out of park and ive stuffed around with it trying different things and no luck.

It happend a cuple of times early in the year but i just turned the car off and back on again then it would work..

Anyone know where that trigger switch is located so i can have a look?

I assume its next too or around the shifter itself?

Thanks

Brendan

Link to comment
https://www.sau.com.au/forums/topic/22724-automatic-shifter-problem/
Share on other sites

The shift lock control unit is located under the lower dash on an R32 models, don't know a great deal about R33 but I supose its in the same spot, the same thing happened to mine when it was auto and I just got used to using the manual shift lock over-ride which is a switch located at the base of the shifter at the front and it has a little red tab on the top and when deprssed it will allow the shifter to be moved.(they made it this way so you can put the car in neutral with out the ignition turned on.)

i tried using stiky tape temporarily but also it seems as if the

switch isnt strong enuf to pull the latch to move the shifter

or

it could be the plastic part which i taped up has a spring attached to it which seems like its too loose or tight for it to move..

im takn it to my mechanic monday to see wat he thinks.. :(

  • 16 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...