Jump to content
SAU Community

Recommended Posts

Hey guys... I drive a R33 Skyline, GTS-T, stock. I have had it for a couple of years and was all into it at the start, until I decided to be a moron, speed on the freeway and lose my license for a year, and since I've had 1 point for a year after my suspension, I had to be an angel and decided to keep any mods to the car as minimum as the sound system, so please don't point and boo too much.

Now that the history lesson is over the question is...

On a stock R33 Skyline, the BOV has the hose that recycles the the air back into the turbo inlet. The questions...

Does removing the hose improve the sound that comes out when you come off the throttle?

Is it bad to remove that hose (for the car that is).

(I've always wondered)

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/227259-beginner-question-bov/
Share on other sites

Yeh the cool pschhh sound everyone loves is a novelty. It draws so much attention to your car and makes me afraid to use heavy throttle.

I'm chasing a GTR bov atm so i can still have high boost and keep it quiet. I too have been on a suspension for the past 9 months (about to get it back!!!) and don't ever want to loose it again.

I did read that some engines would overfuel if the hose is not attached so... I had to ask if the RB baby was one of them.

But since thats the case... Is there any way to make the noise a bit louder without massive mods? I do have a mate who's stock skyline bov sound is quite a bit louder than mine. Is there something with it or just a random freak of... nature? :P

and3_3, because my car is stock, attracting the wrong attention doesn't really bother me that much. Lifting my hood would simply make cops feel like they've wasted their time.

Edited by Hidden.

Thanks guys and erm... Pod filters are illegal right? I do remember a mate who has a 33 tell me a while back that he has to conceal his with some aluminium cover or something. Just wanna know whether I should get a story going when I get pulled over or just smile and let em check.

depends on where you are...im from queensland and i know your allowed a pod filter here, it just has to be supported i think....

Your allowed to have a pod filter her in queensland but it has to be fully enclosed.

AFAIK if you are in NSW, you can fit a pod filter as long as it's enclosed in a box. I *think* the rule is one intake mod, so that means to stay legal you can fit either a pod *or* an intercooler. Better check that one up though. I'm 99% sure about the pod though - I have a friend who got defected big time and decided to go fully legal, and he maintains an enclosed pod is legal.

After having an Apexi pod fitted to mine (non enclosed), I would definitely recommend putting it in a box because it's so damn noisy! Yes it sounds cool from outside the car but you can hear the annoying "sucking" noise inside the car way too much and most people just ask "what's wrong with your car?"... However in a box it probably halves the sound and it's quite acceptable inside.

The Apexi is definitely recommended. Proven to flow the best and also provides the best filtration (some Poms did this test a while ago, a quick search should find the test). I picked mine up off Ebay for just over $120 shipped. When you let off the throttle you will hear what sounds like a very soft externally vented BOV, which I assume is the sound you're after?

Bugger it, I don't need mine anymore, I'm going to sell my car and can't be bothered refitting it - I'll give it to you for $60 if you want - it's in pretty much perfect condition. Only had it on for about a year anyway. PM me if you're interested!

Edited by benro2
AFAIK if you are in NSW, you can fit a pod filter as long as it's enclosed in a box. I *think* the rule is one intake mod, so that means to stay legal you can fit either a pod *or* an intercooler. Better check that one up though. I'm 99% sure about the pod though - I have a friend who got defected big time and decided to go fully legal, and he maintains an enclosed pod is legal.

After having an Apexi pod fitted to mine (non enclosed), I would definitely recommend putting it in a box because it's so damn noisy! Yes it sounds cool from outside the car but you can hear the annoying "sucking" noise inside the car way too much and most people just ask "what's wrong with your car?"... However in a box it probably halves the sound and it's quite acceptable inside.

The Apexi is definitely recommended. Proven to flow the best and also provides the best filtration (some Poms did this test a while ago, a quick search should find the test). I picked mine up off Ebay for just over $120 shipped. When you let off the throttle you will hear what sounds like a very soft externally vented BOV, which I assume is the sound you're after?

Bugger it, I don't need mine anymore, I'm going to sell my car and can't be bothered refitting it - I'll give it to you for $60 if you want - it's in pretty much perfect condition. Only had it on for about a year anyway. PM me if you're interested!

Auto Salon Magazine did a test last year some time (issue 51) with a lot of pod air filters and the apexi power intake pod, which i assume is the apexi pod filter you are talking about, and it did pretty crap. Its flow was 533.3cfm and its filtration wasnt the greatest either. For $125 you would expect a hell of a lot better.

The pod filter that actually won with a flow of 601.2cfm and a pretty damn good filtration was a 3A Racing pod filter that can be picked up on ebay for around $28.95.

Just because it is a well known brand doesnt mean its any good. I know which one i use and reccommend and i keep nearly a hundred dollars in my pocket

Edited by babyskyline
Auto Salon Magazine did a test last year some time (issue 51) with a lot of pod air filters and the apexi power intake pod, which i assume is the apexi pod filter you are talking about, and it did pretty crap. Its flow was 533.3cfm and its filtration wasnt the greatest either. For $125 you would expect a hell of a lot better.

The pod filter that actually won with a flow of 601.2cfm and a pretty damn good filtration was a 3A Racing pod filter that can be picked up on ebay for around $28.95.

Just because it is a well known brand doesnt mean its any good. I know which one i use and reccommend and i keep nearly a hundred dollars in my pocket

OK, here's a test comparing various pod filters, but I still don't think it's the one I was thinking about: http://www.mkiv.com/techarticles/filters_test/2/

And here's an interesting post on another forum: http://www.twincam.info/index.php?showtopic=29632

They rated the 3A Racing filter as excellent however it wasn't tested, and as you can see, the Apexi (Power Intake I presume) also rated at pretty much top of the list. However, they don't provide filtration results. Don't forget that the purpose of an air filter is to actually filter the air! :D

Obviously, the test I was looking at was a number of years old and there have been new products and developments during that time. I'm always a bit dubious about buying a brand that I've never heard of before, especially off Ebay! Although it looks like your test has recommended it so it looks like a good alternative.

BTW do you know how the Sards rate? I haven't been able to find any info on them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...