Jump to content
SAU Community

Recommended Posts

after doing some speed runs last night with a mate, we noticed a noise that was coming from the driver side. we couldnt figure out wtf it was, window seals, door, etc. we were stumped. as it turns out it was the splash guards on the front driver side, front half panel, that had come loose (has been like this for a while now, just really apparent at excessive speeds)

after closer inspection of how they work, i noticed that the panel is different to the one on the passengers side, passenger side has perferations, whereas the driver side doesnt. is this normal?

drivers side: broken

gallery_45120_2701_8217.jpg

passenger side:

gallery_45120_2701_74591.jpg

Edited by G0DZLR
Link to comment
https://www.sau.com.au/forums/topic/227933-front-splash-guards/
Share on other sites

Just get new ones like i did but there is a difference in R33 Series1 and series2. Don't make the same mistake i made and bought a S1 version instead of a S2 ><

1st picture shows my S2 version and why i had to buy a new one. It was so soft already that when driving fast, got slapped by downforce so much it got detached and scrubbed my wheels hence the big hole.

2nd picture shows the S1 version i bought mistakely ><

post-48477-1215940208_thumb.jpg

post-48477-1215940283_thumb.jpg

Edited by teng
  teng said:
Just get new ones like i did but there is a difference in R33 Series1 and series2. Don't make the same mistake i made and bought a S1 version instead of a S2 ><

1st picture shows my S2 version and why i had to buy a new one. It was so soft that when driving fast, it got detached and scrubbed my wheels hence the big hold.

2nd picture shows the S1 version i bought mistakely ><

how much was that? notice its genuine nissan product. whered you source it?

haha silly me, i forgot to put down the part number. From your picture it seems you have a S2 R33.

For S1 - 63844-15U00 - Protector Assembly RHS

For S2 - 63844-26U00 - Protector Assembly RHS (p/n not available on FAST)

Cost me BND150 from my local Nissan Agent.

150.00 BND = 114.444 AUD

Brunei Dollars Australia Dollars

1 BND = 0.762958 AUD 1 AUD = 1.31069 BND

OR if you want a cheaper alternative, then do this. Go to your local metalsheet shop and fabricate one out of thin sheet metel. Costs will be around BND40 bux. The attachment picture is my car but i didn't like the look so i ditched it afterwards and got a Nissan one. lol

post-48477-1215943515_thumb.jpg

Edited by teng

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...