Jump to content
SAU Community

Recommended Posts

Recently copped an epa violation, just got tested, im 10dB over :)

Exhaust dude said if i can find the flange for my exhaust (3in 4-hole, cant seem to find anyone who can tell me where i can find one), he'll weld the new muffler onto it, and i can just bolt it off and put the old one back on after its tested.

So therein be my problem, locating this flange. Ive had a suggestion that i cut all the flanges off and put standard 2-hole flanges in. Is this advisable?

Thanks in advance for any advice or suggestions,

Nasha

Link to comment
https://www.sau.com.au/forums/topic/228125-epa-violation-what-to-do/
Share on other sites

Can you get something put in it to muffle (quieten) the sound a bit?

Well in theory yeah, and i've heard of people doing this, but not exactly sure how its done. And i imagine if not done correctly its just gonna spit out whatever i stuffed in there lol. And it also means i need to goto another tester :)

Anyone have any input towards this idea also??

why dont u just locate a factory cat back? or something quiet enough. bolt it on. get it tested, pass it and then put ur old one back on.

dont go welding crap.

Thats an option i hadn't thought of funnily enough... But sadly, i dont know if my exhaust mod is cat back or turbo back (performed prior to recently purchasing). I'll take a look tomorrow and see if its a viable option

yeh do that.

regardless of if its a turbo or cat back, just replace the catback with something quiet. that way its a easy bolt on and off when u pass the test.

and if u ever run into this trouble again you can just do it again. all you need are jacks or a hoist.

yeh do that.

regardless of if its a turbo or cat back, just replace the catback with something quiet. that way its a easy bolt on and off when u pass the test.

and if u ever run into this trouble again you can just do it again. all you need are jacks or a hoist.

Im just a bit worried about this strange flange. Maybe the entire exhaust setup has these strange flanges, and i wont find anything to get onto it

Im just a bit worried about this strange flange. Maybe the entire exhaust setup has these strange flanges, and i wont find anything to get onto it

the flange only applies to the muffler i believe.

catbacks all have a standardized connection these days. just take it to a local exhaust shop theyll be able to tell u wat it is.

the flange only applies to the muffler i believe.

catbacks all have a standardized connection these days. just take it to a local exhaust shop theyll be able to tell u wat it is.

Well thats a good start, but whats the chances of finding a catback exhaust thats cheaper than a muffler itself?

yeh do that.

regardless of if its a turbo or cat back, just replace the catback with something quiet. that way its a easy bolt on and off when u pass the test.

and if u ever run into this trouble again you can just do it again. all you need are jacks or a hoist.

Except next time you get caught for the same EPA violation its $1000's in fines.

Just replace the cat with a stock one, surly your running a 3" or bigger and its more flow the stocky doesnt flow well at all.

You may wish to look at a EPA tune too (tuned to meet epa standards)

Edited by DECIM8

Any welding shop can plasma cut a flange, all you'd need is a gasket for a template. Buy a peice of 3/8" x 5" square plate and cut it out yourself, cost $2.00 and couple of hours.

All you'd need is a pencil, center punch scribe, hammer, half round file, and a drill with a small bit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...