Jump to content
SAU Community

Recommended Posts

Hey guys,

Have a little bit of a problem. I have had this tapping noise coming from my engine bay. Finally got it around to a mates house who is a mechanic. We narrowed it down by listening to the engine via this big screwdriver and putting it to the block (may have tech term) but looks like a big screwdriver. Anyway, heard a bit of a slapping in the 6th cylinder or top left corner of the RB26. Subsequently we removed the coil pack plug and ran it on 5 pistons and it disapears. Found! Now that I have this nasty slapping in this cylinder only what are my options? It has only started in the last couple of months. Engine is from factory with 115k on the clock. Not too noisy but noticable. HELLLP!! I love my baby, and want to fix her. I have heard the word "rebuild" mentioned. I would like to take that as my last resort at this stage in time. Any suggestions welcome.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/228152-piston-slap/
Share on other sites

Yeh dude sorry 95 R33 GTR. Imported in 2000 been here since, 1 owner and has vouched it has the factory engine as far as he knows unless it got changed before it got here. Umm. Had regular services every 5000kms with good oil. Thats about it.

Link to comment
https://www.sau.com.au/forums/topic/228152-piston-slap/#findComment-4014132
Share on other sites

A mate of mine went through 3 motors in a 96s2 he just kept pumping up the boost and everytime it went to the shop number six piston was shagged, my advice get a compression test asap this will tell you wether or not its stuffed, worse case one of 2 things bottom end rebuild pistons rings and bearings, or source another power plant. thats all i got to offer, but get the compression tested. good luck let me know how you go :)

Link to comment
https://www.sau.com.au/forums/topic/228152-piston-slap/#findComment-4014147
Share on other sites

Does the tapping noise dissappear or become less noticeable after the car has warmed up ?

I had ( still have ) a Holden Ute 2002 SS ( LS1 Engine ) which developed quite a loud piston slap noise ( many of these engines suffered from this issue and it was well publicised at the time ). Many owners had Holden rebuild the engine under warranty but they were real pricks and very difficult to get anything done. They refused a rebuild on mine because it had aftermarket cam and heads etc....

Point of the story being it has been driven hard actually very hard for 6 years and whilst the noise is still audible when cold ( the 5.7 V8 with headers cams and open exhaust do help to drown it out ) the engine has not missed a beat. With 190,000 km on the clock

It is worth noting that ever since the problem was diagnosed I have been using a Moreys Oil additive which is made for older engines ( ie with more wear ) it seems to have a thicker property to it and I just add about 500ml of it to my oil.

Like I said earlier she is driven very hard and has been for 6 years and still going strong.

I would get the problem professionally diagnosed but if a rebuild is out of the question due to cost etc... then consider using the oil additive and keep driving until a rebuild is really really required.

Link to comment
https://www.sau.com.au/forums/topic/228152-piston-slap/#findComment-4029408
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...