Jump to content
SAU Community

Recommended Posts

hey people, I have just recently graduated from TAFE, just completed a Cert 4 In networking and stage 1 and 2 CCNA ..... I am planning to look for work and put my studying aside for now, Been trying to get into a entry level job and its so hard... applied for many jobs on seek and other websites.. lol never got any calls due to that i have no experience ..

So i am hoping any1 on here can get me a job.. once i'm in, will give u $200

easy money... thats 2 weeks of free fuel LOL...

Help a brother out haha

THanks

Welcome to the wonderful world of IT. My best advice to you is get out while you can cause its not worth it. Do something else while you still can lol. Ok if that did not change your mind then i suggest you go around to some IT Recuritement agency and talk to them they will want your resume sent via email and follow up and tell them you will pay them $200 if they can find you a IT job haha. I am sure it will work out soon or later but keep following up with them.

When you do get a job most likely it will be on a contract basis work your ass off so you get a good reference its all worth more than your studies alone.

...if i had of know this when i got in IT I would have spent an extra yr at uni doing a engineering major and be happy right now.

good luck.

If you say that you did not get any calls, then how do you know that is because you have no experience?

If you are not able to get past the 1st step ie. getting a phone call and an interview, I would suggest that you have a good look at your resume and interview skills. I have seen plenty of friends resumes that have been rubbish. after some improvement, all of sudden they were getting calls for interviews.

Use your family, friends and anyone more experienced to help you with the resume and importantly your cover letter.

Some more advise I can give is that those CCNA courses are a big waste of time, ie. CCNA 1-4. If you are serious about learning the material then study it on your own and pass the external certification exam. Doing the 1-4 courses through TAFE or uni are not really worth much unless you have passed the external exam and actually earn the certification.

Welcome to the wonderful world of IT. My best advice to you is get out while you can cause its not worth it. Do something else while you still can lol. Ok if that did not change your mind then i suggest you go around to some IT Recuritement agency and talk to them they will want your resume sent via email and follow up and tell them you will pay them $200 if they can find you a IT job haha. I am sure it will work out soon or later but keep following up with them.

When you do get a job most likely it will be on a contract basis work your ass off so you get a good reference its all worth more than your studies alone.

...if i had of know this when i got in IT I would have spent an extra yr at uni doing a engineering major and be happy right now.

good luck.

ahahhaha you're so cynically like myself...... I'm a BA and I hate my job, and I hate IT.. I wish I did something more exciting like engineering....

Like Bonsai said, get out of IT, it's shiet and too competitive with foreigners, the ones that drive taxis...

Want experience? go do an Internship, mega shit pay... but experience pays off.

I started my first IT job on help desk, that progressed to setting up bullshiet networks for neighbours and friends, got an ABN starting ghosting, building small servers for photo labs, provided network support, Invoiced people, then I got a contract with Defence doing QA work, from there I moved onto a BA role..

yeah... I had to climb the ladder.

nah i got replies back sayin they had more better candidates with revelent experiences ..etc and i get replies bak from email that i do not meet there criteria...liek i got revelent knowledge but lack experience to meet their clients

I own an IT company (in QLD) and can tell you that unfortunately not a lot of personalisation normally goes into the repplies for unsuccessful candidates. It's not great, but imagine how much it would cost to send a personalised reply to 100 unsuccessful applicants that listed the ACTUAL reasons they didn't get the job. It would add thousands to the cost of hiring someone.

So I second the idea that you review the resume and make sure it is good. Employers want experience sure, but with the price of wages these days, someone cheaper who has a very good work ethic, solid foundations and the ability to learn quickly; this can present a compelling case.

But in any case, if you go for a level 1 Help Desk position (big companies are always looking for people coz turnover is fairly high) and stick that out for at least a year (AT LEAST A YEAR - I'll repeat that for the Gen-Ys amongst us :blink: ),then you'll have some experience for a better / more interesting job.

Then if you want decent money in a few years, go study hard and get some big end Cisco quals and get experienced on a range of security appliances and theory.

AFTER you've reviewed your resume, send it to me, ill have a look and forward on to a couple of my mates that are IT recruiters. They will then be able to either help you or give you some real feedback.

I own an IT company (in QLD) and can tell you that unfortunately not a lot of personalisation normally goes into the repplies for unsuccessful candidates. It's not great, but imagine how much it would cost to send a personalised reply to 100 unsuccessful applicants that listed the ACTUAL reasons they didn't get the job. It would add thousands to the cost of hiring someone.

So I second the idea that you review the resume and make sure it is good. Employers want experience sure, but with the price of wages these days, someone cheaper who has a very good work ethic, solid foundations and the ability to learn quickly; this can present a compelling case.

But in any case, if you go for a level 1 Help Desk position (big companies are always looking for people coz turnover is fairly high) and stick that out for at least a year (AT LEAST A YEAR - I'll repeat that for the Gen-Ys amongst us :blink: ),then you'll have some experience for a better / more interesting job.

Then if you want decent money in a few years, go study hard and get some big end Cisco quals and get experienced on a range of security appliances and theory.

Finally, a worthwhile response in this thread.

Mate I would also look at one other section of a job aplication.

The cover letter.

this is basically your chance to sell yourself.

you are one of Many graduates who are looking for the same job.

you have to stand out.

a cover letter saying..

Dear Mr X.

my name is johnny and I'm looking for a job in IT.

I done a tafe diploma in technology Y and think that this job is something I might be able to do.

IS NOT GOOD ENOUGH.

The FORMAT of your CV is also very important.

and at this stage in your career, it is probably more important than the text you have on it as you have no experience.

When applying for jobs, they don't make it obvious, but you know the "CRITERIA" section they have... well they are the "questions" you have to answer.

Your job application should have a section where you show past experiences/situations where you've proven you have "those" criteria.

1.) Cover letter

2.) Selection criteria responses

3.) CV

Apparently they have the internet on computers now so you could probably search for information on how to lay out your CV or how to respond to the criteria requirements.

Remember to sell yourself.

Your personality needs to come out in your application.

Since you've got no relevant experience in IT, your other aspects like how you get on with others etc needs to be your selling point, so that a company will spend the time/money on paying and training you.

I'm a BA and I hate my job, and I hate IT.. I wish I did something more exciting like engineering....

Heh i'm the opposite - did a mech eng degree and as soon as i graduated i went into IT (at the bottom of course). The industrial experience work i did for mech eng was boring as batshit - using the australian standard to join the dots design pressure vessels.... GTFO. I love IT!

For the OP - i dunno what that "stage 1 and 2" CCNA stuff is, but if its the Cisco certified network associate, just run up a copy of dynamips, study the shit out of it and go for the cert. There's plenty of study guides about. Its an easy cert. You're probably going to start at helldesk, so a Microsoft cert might help as well.

Stage 1 and 2 means nothing without you taking the actual exam and pass it.

I've gone through all 4 stages of ccna and did my exam and passed. Do it while its still fresh in your mind I would say. The longer you wait, the less motivated you are.

Start off small, 36k - 40k helpdesk role are relatively easy to get, but if you can land one in a big company, it'll be a plus. You'd be amazed how much skill you'll actually pick up by just doing helpdesk stuff. Then in your spare time, get as many IT certs as possible and apply for a nother role either within the same company or a different company. You'll most defitnitly get a healthy pay rise from doing that. I'm speaking from my personal experience.

Btw, half the time you are not getting a response from recruiter is because of your resume, the other half is because you do not fit the technical profile.. Make it as professional as you can and you MUST have a cover letter for every resume you send.

Edited by __PhaseShiftDown

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...