Jump to content
SAU Community

Recommended Posts

I have been considering importing a V35 skyline but I'm not sure if it will be a cheaper option than buying locally.

To import I know that you will need another $10,000 - $12,000 on top of the FOB price of the car to get it to your door complied. When I look at the price of cars at the auctions and add the $12,000, it doesn't end up being much cheaper than buying a local car.

Is there anyone out there that can share their opinion?

P.s

I would like a black or white 350gt coupe with the half leather or full leather seats, bose stereo and manual. I would also consider auto. Any other features like sunroof, brembo's etc. would be nice but I'm not fussy. Only really want to spend about 30k on road. This would mean I can only spend about 18-20k on the car which I'm guessing is on the lower end of the market.

George

Link to comment
https://www.sau.com.au/forums/topic/228531-v35-import-or-buy-local/
Share on other sites

v35s have dropped dramatically in recent times

for an grade 4b-4.5a 03 auto 2 door 350gt with 50-80000km you can be looking as low at 11-12,000$ in japan . A rough figure landed and complied would be around 20-22.

Manuals and 04/05s are more , brembo's add a more also.

these prices are very cheap at the moment and could return to normal at any time.

I agree totally, local prices have not dropped to match the recent decrease in average sale prices in Japan yet so now would be the worst time ever to buy a V35 locally ... either way another 6 months for local prices to follow suit (probably around $3,000 to $5,000 saving across the board) or buy in Japan and import one. It will always be cheaper to import because you have to consider that all cars being sold here have been imported at some stage and are almost always sold at a profit except for very odd situations, so although importing takes a while compared to buying locally you will always save money as long as you buy the right car.

We have heaps of good V35's available all the time and I will be happy to show you a bunch that you might like which are well within your budget if you email me directly at [email protected] with your required specs, your location in Australia, and also make sure you note that you are an SAU member too!

Read this link off SAU but this is only one side of a double edged knife as you would say, you will get good and bad story's from both sides and the retail/private pricing in Australia has caught up with the prices in Japan.

The last 3 personal cars of mine over a 2 year period being a JDM EVO 8, manual PV35 and F50 Cima were all purchased in Australia and I have access to any plate I want but that was my personal choice.

Shop around is the key and http://carpoint.com.au/ is a good place to start.

i bought locally because its safer and easier, but you pay for it

its always goign to be cheaper to import, but you always have the risk

There shouldn't be any risks if you choose the right company to import the car for you. :D

There shouldn't be any risks if you choose the right company to import the car for you.

That is as far from the truth as you can get and any professional person in the industry would be full of shit if he didn't tell you that, their are risks no matter who you use in Japan or Australia and no matter how long you have been importing cars for be it private or dealer, remember that is were your "savings" are deemed to come from till something goes wrong.

What happens if your CPV35 head light is damaged in transit or that EVO 8 you imported has a stuffed transfer case (remember not test driven in Japan) or during moving at the docks because your car is so low it bottoms out and has damaged the chassis do you think Japan or the person helping you import the car is going to pay (yes it has all happened).

You have people who haven't had issues but then a few that have, if you are willing to take a risk so be it but you are told the more expensive the car is the more you save but they forget to tell you the more expensive it is the more it costs to repair......

There shouldn't be any risks if you choose the right company to import the car for you. :D

hi,

I imported without any problems, but can't say there weren't a few anxious moments waiting to get it shipped, complied and safely in the garage. the adantage of importing is that you can [ as long as you are willing to wait] get the exact car you are looking for, and not settle for a veh that doesn't have all the 'wish list' items. hook up with someone knowledgable/trustworthy over there, tell him exactly what you want, then wait 'til he identifies a target car. if it is the car of your dreams, tell him to bid to a price you are willing to pay; bearing in mind what the car would sell for here. if the car's auction price is over your limit, aniother will come along [that happened to me], if it's auction price is less than your limit [that didn't happen to me], you have a bargain.

that is my experience with importing, for what it's worth!!. I am currently waiting for another car to be identified by my agent also.

good luck, whichever way you go.

regards

There shouldn't be any risks if you choose the right company to import the car for you. :D

ignorance is bliss, hey?

DRIFTT summed it up well.. any unforseen event can happen, that's why they call it unforseen! hell the ship could sink or your container could fall off the ship there are so many places things could go wrong. 9/10 people don't have a problem but that's the risk you take

^^^ Your aunty could also turn out to be a man. Life is full of risk, it's how you manage it that counts. Unfortunately, buying an import from a car dealer locally isn't necessarily a risk-free experience either... (that comment is not directed at anyone, so don't take it personally!)

Edited by Iron Chef

I think importing is the way to go, I've seen many more horror stories with locally sourced cars unfortuantely. The V35 Premium my dad just got is what I'd class "as new" (I don't say that often) and was a steal. We looked at local non-premiums that were "well seasoned" and cost $10K more, pffft!

Anyway, all cars have issues at some point, it's just how frequently and how costly they get....it's a risk car ownership brings with it :)

I've bought a V35 from Japan and locally, and was much more pleased with the local car.

My import process went fairly smoothly, but there were a couple of points on the car not mentioned in the auction sheet.

When it came to my second V35 I went locally. Actually interstate. I had the car completely inspected with a 5 page report highlighting any issues.

Locally you're also able to go and see the car for yourself, and of course take it for a test drive.

BUT the most important thing!!

If you find what you want locally, you don't have to wait 3 months between handing your money over and driving the thing :-)))

I would consider importing again, as the people I used were great. (quick plug - J-Spec). But would really only do so if I'm saving around $5k+ or so or if I had absolutely no luck here in Aus.

^^^ Your aunty could also turn out to be a man. Life is full of risk, it's how you manage it that counts. Unfortunately, buying an import from a car dealer locally isn't necessarily a risk-free experience either... (that comment is not directed at anyone, so don't take it personally!)

The exporters in Japan who sell low grade cars of course sell the cars to anybody be it private importers or car dealers and certain exporters (Chef knows who I am talking about) just stung another car dealer big time.

Quality control in Japan is becoming more and more important, particularly with more and more people fighting over less and less cars.

Chef, has there been any quick changes to help this, or is the system as was, just buyers are a little more careful?

It really depends on the supplier in Japan - ones that have high overheads and have to do big numbers to survive often start to panic and end up buying crap just to keep sales up (works in the short term, but burns customers obviously). Auction houses also have the same problems, so what used to be a grade 3.5 is now a 4, and cars can be a 4B and be totally rusted out underneath, so you have to really know your stuff when reading auction sheets.

My last trip to Japan, I literally picked up half the number of cars I normally do, and none at all from USS Tokyo on the Thursday, which is the largest auction in Japan. In the end, I'd rather buy no cars than crap ones. There are still good cars around, but you have to pay reasonable money for them. It's the customers who want to throw low bids on everything and try and snag something cheap that often end up waiting much longer than they used to.

Hi George,

When a person is on a tight budget, one has to be even more careful to get the most reliable car there is, first up! You don't want to be forking out $$ straight away after the purchase.

From the posts above, there is risk whether or not you import or buy locally; however, you minimise that risk through buying locally.

Why?

After using your eyes to look over the condition of its engine, body, undercarriage etc, you then turn the engine on and then... What?

How many messages do you get through your seat?

How many messages do you get through the wheel?

These messages will not show up on the Auction Sheet! You only get a Number #3/3.5/4/4.5/5 and these numbers can be embellished.

I've bought GTRs locally every time - and of course I've had the luxury of analysing every nuance that I could. Then I can make a more valued choice.

One more important thing. Every GTR that I've sold,

i) I've only lost $2K per year in depreciation (because I not only took care of it, but it was a prime example of what most GTR buyers would want on 1st inspection) &

ii) Every buyer has said that the car I was selling was the best example out of the array that they had inspected over months of seeking

So if you pick a good one - you'll end up selling a good one later on.

Cheers,

Terry

So if you pick a good one - you'll end up selling a good one later on.

best call ever.

this is too true, and in terms of hte V35, there is a HUGE difference between the options you can get and the condition of the cars. by getting a godo condition car with all the options you are just making it that much easier to sell the car in a few years time when there are hundreds on the market and yours stands out like dogs balls as being the best example

best call ever.

this is too true, and in terms of hte V35, there is a HUGE difference between the options you can get and the condition of the cars. by getting a godo condition car with all the options you are just making it that much easier to sell the car in a few years time when there are hundreds on the market and yours stands out like dogs balls as being the best example

You betcha Waz,

It even applies to a Hi-oon-die that the owner sells to a teenager for his/her 1st car.

We never want to sell them a dud!

Cheers,T

Hi George,

When a person is on a tight budget, one has to be even more careful to get the most reliable car there is, first up! You don't want to be forking out $$ straight away after the purchase.

From the posts above, there is risk whether or not you import or buy locally; however, you minimise that risk through buying locally.

Why?

After using your eyes to look over the condition of its engine, body, undercarriage etc, you then turn the engine on and then... What?

How many messages do you get through your seat?

How many messages do you get through the wheel?

These messages will not show up on the Auction Sheet! You only get a Number #3/3.5/4/4.5/5 and these numbers can be embellished.

I've bought GTRs locally every time - and of course I've had the luxury of analysing every nuance that I could. Then I can make a more valued choice.

One more important thing. Every GTR that I've sold,

i) I've only lost $2K per year in depreciation (because I not only took care of it, but it was a prime example of what most GTR buyers would want on 1st inspection) &

ii) Every buyer has said that the car I was selling was the best example out of the array that they had inspected over months of seeking

So if you pick a good one - you'll end up selling a good one later on.

Cheers,

Terry

I agree with everything you've said Terry, the problem comes when the seller isn't as scrupulous as you (or me for that matter - I've just spent $2K fixing everything on my JZX100 getting it ready for sale), and the buyer isn't that good at checking cars (or worse, over-confident about it).

One of the hardest things for people to get their heads around is that, yes cars available locally are generally more expensive than importing your own, but someone else has tied their money up to bring that car in, and you should pay more to have the luxury of seeing the car and test driving it before you buy.

You'd be amazed at the number of people who call me wanting a car, but don't want to pay for it until they've seen it in the metal...I'm not sure who they think will cover all the bills for it in the meantime...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...