Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

if you could get a quote for a s/s version to suit a r34 (would have it in a simular location to where yours is), with the speedflow fittings i would be keen. I believe you that there hasnt been any problems, i'd just rather have peice of mind when i'm booting the shit out of it, knowing that there is no way main oil lines will be leaking/popping off.

Also, could the thermostat be intergrated into the s/s line?

:(

yeah the thermostat can still be used, just means another 4 fittings.

fair enough for wanting peace of mind, it just costs a bit more

im going to have a sus on exact pricing on monday.

how much for just the oil cooler core only ?

pm sent

would this fit a 7mgte / 7mge (from ma70 supra) also interested in speedflow fittings

yeah, it definitely fits the block.

NOW for the few people who are interested in the braided line version with speedflow fittings (blue and red anodised alloy) it will cost another 150-170 on top of each kit price. (not including the thermostat.) That is IF there are a few people who are interested in the kit with the braided line and fittings.

The braided hose itself is actually of a larger diameter also which means less restriction on the system.

So we're looking at around $550-$570 including the braided lines, speedflow fittings and thermostat?

I may be interested. Need to measure if the core will fit in the front of my Stagea somewhere.

I'm interested in an oil cooler with thermostat and speedflow fittings.

+1 definately interested in the whole lot

how many people did you need for the braided version to go ahead?

So we're looking at around $550-$570 including the braided lines, speedflow fittings and thermostat?

I may be interested. Need to measure if the core will fit in the front of my Stagea somewhere.

incorrect. another 4 fittings and 4 adapters are needed for the thermostat.

the kit will be 2nd to none though, with every component being the best you can get.

I'm interested in an oil cooler with thermostat and speedflow fittings.

interested as in deposit interested?

+1 definately interested in the whole lot

how many people did you need for the braided version to go ahead?

3 deposits of say $80 will get it rolling. 1/2 week turnover.

this whole kit needs to be revised if there is CERTAINTY for the braided version with necessary fittings.

the first quote was for 3.5M of braided hose.

if you measure how much hose you require in TOTAL i can adjust kits to suit.

PLEASE DISCUSS, because the fine details are important.

I'm looking at mounting the oil cooler where the SMIC is. (Will be changed to FMIC of course) So if you could allow for that length. 3.5m should cover it I would think.

this whole kit needs to be revised if there is CERTAINTY for the braided version with necessary fittings.

the first quote was for 3.5M of braided hose.

if you measure how much hose you require in TOTAL i can adjust kits to suit.

PLEASE DISCUSS, because the fine details are important.

if you copied a simular length to what you have in your car, but just in braided line and the provision for the thermostat that should work well. Most people would have it in a simular location to where yours is.

You can definately add me as apart of the group of 3, as soon as 2 other people show interest in the same kit i dont mind putting $80 deposit

:P

if you copied a simular length to what you have in your car, but just in braided line and the provision for the thermostat that should work well. Most people would have it in a simular location to where yours is.

You can definately add me as apart of the group of 3, as soon as 2 other people show interest in the same kit i dont mind putting $80 deposit

:P

I'm sweet for a deposit too.

Hey mate,

Interetsed, but can you please confirm price for full kit, with braided lines long enough to mount on the passenger side of a 32GTR?

Whats the actual size of the core, (Dimensions)

is there any chance of buying the speedflow fittings and ss braided hose by itself?

i'm quite keen as i have a similar setup using the permacool and b&m thermostat with a sertrab core

i'm yet to be install the kit on the car,

and i have always been a little concerned about the rubber hose that is supplied kinking and then restricting the oil flow...

pm me if possible,

thanks,

greg-

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • lights are on just the one click.  
    • Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...