Jump to content
SAU Community

Recommended Posts

atmospheric BOV's sound heaps better, especially when you hit fullboost and release throttle and hear this almighty TSCHHHH come from the car, is much better than having a goddamn muztek style dose lol

I don't think atmo bov's have any performance value since it's venting the aircharge into the bay, but i like the sound of mine at least, so yeah, guess its a personal preference for the noises you like to hear out of your car lol.

You could block your standard BOV i.e. with a piece of sheet metal.

My mate's R32 is running a fairly big turbo without a BOV, so as the air recirculates through the compressor housing it makes a HUGE whistle/chirp sound, sounds like feeding an air compressor through a massive flute.

When he's on my right and my window's down he changes gear and splits my f**ken ear drum open. My ears nearly bleed.

Good times :thumbsup:

Stock is the smart decision

But if you must have an atmospheric bov, the novelty wears off and you eventually feel like an idot, not to mention it will hurt if you get a yellow sticker, anyways go with a turbosmart i think they sound the best. This may hurt the hks fans but DONT get a hks ssq they sound crap like a large high pitched whistle but it is a very popular choice. So obviously i am different in taste in that aspect.

But i would deffinetly reccommend a stock bov.

Get an after market one, its a novelty everyone wants at first.

Yes, they certainly are a novelty...

You could block your standard BOV i.e. with a piece of sheet metal.

My R31 ran with no BOV, FMIC and apexi pod filter and made the filthiest fluttering noises you've ever heard. Sounded fantastic.

I've tried the blanking plate on my R33 and the ECU does NOT like it. Pops and farts like crazy on gear changes, so I went back to standard. With the BOV blocked it definitely felt crisper on gear changes but the extra backfires meant it wasn't worth it.

Yes, they certainly are a novelty...

My R31 ran with no BOV, FMIC and apexi pod filter and made the filthiest fluttering noises you've ever heard. Sounded fantastic.

I've tried the blanking plate on my R33 and the ECU does NOT like it. Pops and farts like crazy on gear changes, so I went back to standard. With the BOV blocked it definitely felt crisper on gear changes but the extra backfires meant it wasn't worth it.

Well if you want that back if you get it tuned with apexi pfc to suit it will run fine

Well if you want that back if you get it tuned with apexi pfc to suit it will run fine

You can never get even a PFC l-jetro to run fine without a BOV, as the fluttering load cells are the same cells that you see at cruise, so you can only tune it to suit one of the conditions... runs rich on gearchanges

Kinks how does my daily ride have any bearing on a thread about blow off valves? begone troll.

I hate dosing, just makes me think of wankers in VL Turbos, and the noise gets grating on my ears very quickly.

Mine's a Turbosmart Supersonic BOV, I like the sound, and the cops around here have never given a toss about it, and yes ive let it off near them accidentely, but chances are if they are pulling you over to defect you they're going to make something up if they dont find anything anyway. Having the stock crossover pipe helps, if I ever did get defected for it, its easy to swap with the stocker.

Can't find a video of anything that sounds like it, needless to say it dosen't sound like one of those godawful Blitz (or was it HKS? high pitched whistle) ones which sound like something from Need For Speed.

Edited by bozodos

I'm due for a new BOV as my standard one leaks like a sieve (and yes I have tryed the "no more leaking BOV mod" to all you smarties with your stock BOV's)

I'll go a turbosmart plumbback, Hopefully it'll be quite.

I used to think the BOV noises were pretty cool, but after seeing (rather hearing) every other Tom, Dick and Harry with one on there piece of shit I don't want a noisy one.

I hate it when people put them on there car to trick you into looking at there Daihatsu's and other pieces of crap.

I'm due for a new BOV as my standard one leaks like a sieve (and yes I have tryed the "no more leaking BOV mod" to all you smarties with your stock BOV's)

Is the BOV rooted? If the spring isn't tensioning the diaphragm properly put the BOV in a vice and crush it down a little. That will increase spring tension, meaning more boost needed to force it open.

I've read about doing this on SAU, haven't tried myself (but the 'stop leaking BOV' mod worked a treat :blink: ) so if your car turns into a fireball blame the shonky b**tard that originally said it.

kthxlater

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...