Jump to content
SAU Community

R33 Skyline With Rebuilt Engine And Gearbox

stuartlaw_78
 Share

Recommended Posts

stuartlaw_78 Community Regular

stuartlaw_78

Posted
Posted

post-24533-1216636897_thumb.jpgpost-24533-1216636811_thumb.jpg

post-24533-1216636861_thumb.jpgpost-24533-1216636914_thumb.jpg

$11,400

Make: Nissan

Model:Skyline

Milage:32,000km since rebuild

Transmission:5 Speed Manual (About 4,500km since rebuild

Colour:Silver

Location:Melbourne

Complied? Yes

RWC supplied? Can be if required

Currently registered? Yes - It's still got at least 6 months rego on it. It's been in storage.

Price: $14,000

Contact: Mobile: 0403 387 451 or email me at [email protected]

Ok, time to let go of the beast. I've got 2 reasons for selling this car. 1- I have had a work car with fuel paid for and 2- I am buying a VAF home theatre system for the new house and the thought of having this theatre system outweighs the thought of having my car sitting in storage not getting driven.

-I rebuilt the engine in 2006 and it has done about 32,000kms since the rebuild.

Forged Weisco Pistons 20thou oversized.

The block was crack tested and acid dipped.

ARP Conrod bolts and shot peened rods

Polished and balanced crank

The block was bored out 20 thou

ARP head studs holding the head down

rebuilt head with new seals and hydraulic lifters. Standard cams

Hi-flowed Turbo good for 250rwkws with a 3 inch dump with wastegate pipe

-JIM BERRY Organic clutch (3100lbs clamping pressure) Such a good clutch, done 4,500kms.. got changed with gearbox rebuild.

-3 1/4 inch exhuast all the way through. Sounds nice but not too loud.

-The gearbox was rebuilt by Fitzgerald racing. Look them up, they havea great reputation. Expensive but worth it!

-Bilstein Shocks all round.

-Bendix Ultimate Pads

-17inch Wheels

-Rear bar (not too sure what it is, check out the pics)

-Sway bar on the front.

-Cold air box

-Pioneer Head unit with FOCAL speakers all round. 12 inch sub. Got 4 channel amp for FOCAL speakers and another powerful amp for the sub. All installed and sounds great.

-VIPER pager alarm. This has an in-built turbo timer and auto window wind up and door locking on arming your car.

Guys, I'm not that fussed if I sell this car pr not, it'd be good to get the money but I do like the car. I will sell it to the first person who wants it so send me a PM, call or sms me, or email me.

The car has done only 38thou since rebuilt and only 4,500thou on gearbox. It drives like new.

I can spot a tyre kicker a mile away so please only contact me if you are interested in the car.

I put about $7,000 of parts into the engine and another $2000 into the gearbox (Obviously spent more on labour).

The car has been in storage for the last 4 months as I just don't drive it.

The body work is in great condition. It has the typical stone chips on the front bar that a 1993 Skyline would have but nothing bad. The rest of the car is straight and paintwork is great.

stuartlaw_78 Community Regular

stuartlaw_78

Posted
  • Author
Posted

Ok guys, the car has to go..... I am at a stage now where I will take the best offer that I get... (within reason obviously)

Make me an offer!!

post-24533-1216636897_thumb.jpgpost-24533-1216636811_thumb.jpg

post-24533-1216636861_thumb.jpgpost-24533-1216636914_thumb.jpg

$11,400

Make: Nissan

Model:Skyline

Milage:32,000km since rebuild

Transmission:5 Speed Manual (About 4,500km since rebuild

Colour:Silver

Location:Melbourne

Complied? Yes

RWC supplied? Can be if required

Currently registered? Yes - It's still got at least 6 months rego on it. It's been in storage.

Contact: Mobile: 0403 387 451 or email me at [email protected]

Ok, time to let go of the beast. I've got 2 reasons for selling this car. 1- I have had a work car with fuel paid for and 2- I am buying a VAF home theatre system for the new house and the thought of having this theatre system outweighs the thought of having my car sitting in storage not getting driven.

-I rebuilt the engine in 2006 and it has done about 32,000kms since the rebuild.

Forged Weisco Pistons 20thou oversized.

The block was crack tested and acid dipped.

ARP Conrod bolts and shot peened rods

Polished and balanced crank

The block was bored out 20 thou

ARP head studs holding the head down

rebuilt head with new seals and hydraulic lifters. Standard cams

Hi-flowed Turbo good for 250rwkws with a 3 inch dump with wastegate pipe

-JIM BERRY Organic clutch (3100lbs clamping pressure) Such a good clutch, done 4,500kms.. got changed with gearbox rebuild.

-3 1/4 inch exhuast all the way through. Sounds nice but not too loud.

-The gearbox was rebuilt by Fitzgerald racing. Look them up, they havea great reputation. Expensive but worth it!

-Bilstein Shocks all round.

-Bendix Ultimate Pads

-17inch Wheels

-Rear bar (not too sure what it is, check out the pics)

-Sway bar on the front.

-Cold air box

-Pioneer Head unit with FOCAL speakers all round. 12 inch sub. Got 4 channel amp for FOCAL speakers and another powerful amp for the sub. All installed and sounds great.

-VIPER pager alarm. This has an in-built turbo timer and auto window wind up and door locking on arming your car.

Guys, I'm not that fussed if I sell this car pr not, it'd be good to get the money but I do like the car. I will sell it to the first person who wants it so send me a PM, call or sms me, or email me.

The car has done only 38thou since rebuilt and only 4,500thou on gearbox. It drives like new.

I can spot a tyre kicker a mile away so please only contact me if you are interested in the car.

I put about $7,000 of parts into the engine and another $2000 into the gearbox (Obviously spent more on labour).

The car has been in storage for the last 4 months as I just don't drive it.

The body work is in great condition. It has the typical stone chips on the front bar that a 1993 Skyline would have but nothing bad. The rest of the car is straight and paintwork is great.

  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Chupapy
      New r33 owner

      By Chupapy · Posted

      Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...