Jump to content
SAU Community

Recommended Posts

Hey Guys, recently my battery died because i left my lights on so i had to jump start it, so after ive jump started the battery ever since then ive had this problem with my power steering.

now i dont know if its got to do with the jump start or if it was just a coincidence, but my power steering is now screwed, it gets really hard at times to turn a corner.

When i turn a roundabout for example itll seize up and release, its mixed. So its not like its hard the whole way round, just split moments if im making sense. Now ive checked my reservoir and its full and doesnt seem to be leaking, and my p/s fuse seems to be fine, so any information you guys can give me would be much appreciated. :blush:

Cheers,

Steve.

Link to comment
https://www.sau.com.au/forums/topic/229184-power-steering-problem-r32/
Share on other sites

the main reason for heavy steering is a leak somewhere. and considering the numerous little pieces of presumably old rubber between the diferent hard line sections scattered all over the car, including the ones back to the hicas..... ya probably leaking somwhere.

replacing old power steering lines has become a hobby of mine with my 32.... just about got them all.

probably a fault with the vehical speed sensor, maybe fried it when you jump started. as i understand it, when your at idle and not going anywhere a solinoid switches the powersteering pump into a low pump mode so it doesn't bog the engine down, once you start moving it swiches the pump to full. if you speed sensor if playing up the pump wont be switching into full mode hense the heavy stearing.

try doing a ecu diagnostic and HICAS diagnostic and see if you get an error code. there is info on this in the tutorial section. or if you know someone with a consult cable get them to check for you.

It's a voltage problem. You may well have to replace the battery.

Same thing happened to me a few weeks ago, its definitely voltage, mine turned out to be the alternator had packed it in. The HICAS solenoid was opening and closing with a lack of voltage at idle whilst driving at night with headlights and accessories on. Sounded like there was something caught around my drive shaft and slapping against the foot well but really it was the pressure building up in the lines by the pump and then and getting released sending a shock wave through the lines, it was only audible at a standstill at low revs, when i was moving it just turned into heavy-light-heavy steering as i was turning a corner. My alternator seemed to work on start-up when it was cold (14.5V i think) then stopped working after a few minutes causing rough idle, whine through the stereo and dim headlights. I ended up killing a battery a new battery in the process by dropping it below 8V for too long and it never came back even after i changed the alternator. In the process of getting a battery zapper to see if i can bring it back to life, cold winter mornings are asking alot more from the battery than usual. Its been 2 weeks with a new alternator and haven't had any steering problems which used to happen everyday.

it wasnt the battery or the alt. I went past oh performance and they seem to believe it may be the power steering pressure sensor, so im looking at changing that to see what happens, but i cant seem to find 1. Anyone know where i can find 1?

hey mate. if your alternator is overcharging for example 15volts and over it could be spiking the computer and the system is shutting down because of it saving the components in your power steering. charge rate for all vehicles should be no lower then 13.5v and 14.8v. some of these problems i've seem through my workshop are caused from an intermitted charging fault. the battery wont cause the problem as it is only a storage device, once the vehicle is running the alt runs the vehicle, not the battery. hope the helps.

yea thanks mate, it is overcharging, because what ive realized is when i start the car the voltage sits at around 12v and the steering is perfect, as soon as i give it a rev past 3,000rpm the volts rise to about 14.5-15.0v and the steering is rough.

But another thing that happened that i found really weired is i changed my fuel pump the other day and ever since then, night time driving is great, voltage sits from 13.9-14.3 and steering is perfect but day-time driving sits at 14.5-15.0 again. Thats trippy shit.

So anyway, we've come to the conclusion that the alt needs to be changed.

Thanks for all the feedback guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Get an inspection camera up there. 
    • Yeah, but look at the margin in viscosity between the 40 and the 60 at 125°C. It is not very large. It is the difference between 7 and 11 cP. Compare that to the viscosity at only 90°C. The viscosity axis is logarithmic. The numbers at 90 are ~15 and ~35. That is about half for the 40 wt oil and <half for the 60. You give up viscosity EXPONENTIALLY as temperature rises. Literally. That is why I declare thicker oil to be a bandaid, and a brittle one at that. Keep the oil temperature under about 110°C and you should be better off.   Having said all of that, which remains true as a general principle, if you have indeed lost enough oil from the sump that the pump was seeing slightly aerated oil, then all bets are off. That would of course cause oil pressure to collapse. And 35 psi is a collapse given what you were doing to the engine. Especially if the oil was that hot and viscosity had also collapsed. And I would put money on rod or main bearings being the source of the any noise that registered as knock. Hydraulic lifters should be able to cope with the hotter oil and lower pressure enough to prvent too much high frequency noise, although I am willing to admit it could be the source.
    • Thanks for the reply mate. Well I really hope its a hose then not engine out job
    • But.... the reason I want to run a 60 weight is so at 125C it has the same viscosity as a 40 weight at 100C. That's the whole reason. If the viscosity changes that much to drop oil pressure from 73psi to 36psi then that's another reason I should be running an oil that mimics the 40 weight at 100C. I have datalogs from the dyno with the oil pressure hitting 73psi at full throttle/high RPM. At the dyno the oil temp was around 100-105C. The pump has a 70psi internal relief spring. It will never go/can't go above 70psi. The GM recommendation of 6psi per 1000rpm is well under that... The oil sensor for logging in LS's is at the valley plate at the back of  the block/rear of where the heads are near the firewall. It's also where the knock sensors are which are notable for 'false knock'. I'm hoping I just didn't have enough oil up top causing some chatter instead of rods being sad (big hopium/copium I know) LS's definitely heat up the oil more than RB's do, the stock vettes for example will hit 300F(150C) in a lap or two and happily track for years and years. This is the same oil cooler that I had when I was in RB land, being the Setrab 25 row oil cooler HEL thing. I did think about putting a fan in there to pull air out more, though I don't know if that will actually help in huge load situations with lots of speed. I think when I had the auto cooler. The leak is where the block runs to the oil cooler lines, the OEM/Dash oil pressure sender is connected at that junction and is what broke. I'm actually quite curious to see how much oil in total capacity is actually left in the engine. As it currently stands I'm waiting on that bush to adapt the sender to it. The sump is still full (?) of oil and the lines and accusump have been drained, but the filter and block are off. I suspect there's maybe less than 1/2 the total capacity there should be in there. I have noticed in the past that topping up oil has improved oil pressure, as reported by the dash sensor. This is all extremely sketchy hence wanting to get it sorted out lol.
×
×
  • Create New...