Jump to content
SAU Community

Recommended Posts

hey guys, if u culd give me a few pointers on the stock turbos on the r33 '95 model' gts-t.

well the trouble is 4 starters i don't kno anything bout these things, so i dunno if it's alright or not.

well anyways i'v had it since yesterday, an well in 3rd gear u can hear the turbo going, but im not getting all that much power from it,

it just sounds like a big old school fan blowing really hard. lol

an i noticed 2night when in 2nd, i hit bout 3rpm, an then it just magically jumps up2 3.5rpm

then up 2 4rpm.

an the same in 3rd.

should i be worried????????????

HELP. lol

Link to comment
https://www.sau.com.au/forums/topic/229231-possible-turbo-troubles/
Share on other sites

Yeah I'd be guessing clutch slip too.

The first thing I'd be doing is taking it to a mechanic to get it checked over - they might pick up other things that need attention too, and could save you money further down the track. There are plenty around but as with anything, there are good ones and not-so-good ones.

Are you in Brisbane, or elsewhere in Qld?

  • 3 weeks later...

mmk, had a new clutch put in, (it took ages)

anyways after driving from stafford 2 caboolture on the m1, it was all fine till i got 2 the suburbs,

then the tacho started playing up again in 2nd.

i took it 4 a drive up mt mee 2day 2 see if it was slipping but the tacho wouldn't do it?

maybe it is just a dodgy tacho?

any pointers

Does the engine change revs (ie does it sound like the revs match the tacho?) or is the tacho just doing its own thing? If it sounds like the engine is revving when the tacho says it is, it's most likely not a problem with the tacho.

Try this. Out on the highway, drop to 90km/h or so. Put it in 4th and nail it. If the engine picks up a heap of revs (ignore the tacho, you should be able to hear the engine) you most likely have clutch problems. If it doesn't slip, you either have something else wrong, or nothing's wrong and you're just worried about your baby :wave:

If you're really worried about it, I live on the north side of Brissy and I'm happy to come for a drive with you. I'm no expert but I'm happy to look at it?

that would be nice if u could come check it out,

the tacho does it's own thing, i can hear the turbo more then i can hear the rev's of the engine.

but like i said b4 it done it last night but not this morning? whats up with that..?

maybe ur right an i am just paranoid..

Water pump seal? Didn't even know it was busted! But yeah water pump issues can be evil, if it's a decent leak don't drive it anywhere, you most likely won't get any warning on the temperature gauge until it's already done some damage.

Where's the car atm? Ie at your house in Caboolture, or at a workshop, or somewhere else? If you trust people to come to your house (and that's a lot of trust, but it's your call) that might be the best way to do it, that way if it does turn out to be a big problem you don't have far to go. Don't post your address in here obviously though lol. Keep it to PM ;)

the car is at home, cuz i have the company car as well.

yes the water pump seal is leaking but it isn't 2 bad, it's not alot of water wastage.

it is getting replaced either this saturday or the following saturday,

i do still drive it, an it isn't losing much water at all, just mainly when u start it, apart from that, nothing much.

an yes this is my 1st turbo charged car, dantay, but there isn't much boost 2 begin with,

we can all have a look at it on the cruize.

Edited by omy-33
  • 1 month later...

Best thing you can do, cover the intake side of the turbo, where your bleed off for your waste-gate is, put compressed air into that hose and do a intercooler leak test.

Abit hard to explain but that's the ezy way to sus for cooler leak's.

If no air leak, one proplem out the way.

WHITEY

it was doing it b4 i got the fmic in, an it's still doing it. i'v nailed it down 2 the instrument cluster, because it's completely impossible 4 the engine 2 do what it does.

so yea i'v nailed out intercooler troubles, and clutch troubles because i'v had the new 1 put in.

how ever gonna get the transmission looked at and a bearing replaced,

it's sqeeky, an will prob collapse soon, i think it's called a thrust bearing, oh sumthing like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...