Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm after these specific brand of wheels. Only place that stock WedSport I could find is JJR but I don't particularly want to bother them since they'd be going through a pretty hectic time right about now. And even they don't have the model I'm after.

I've tried about 4 wheel shops in perth/rocko/mandurah. no one stocks them. Tried Tech9, Westcoast Wheels, West State, and some others.

Does anyone know who can source these? :D

Link to comment
https://www.sau.com.au/forums/topic/229340-wedssport-wheels/
Share on other sites

Nar I'm not waiting 4 months minimum for Nengun to dispatch it. I want them for Motorvation. And I want my entry form in by early September before I leave for Jap-land.

It's cool though, Nigel of Black Sun is helping me find them. :D

what model?

i can get most rims; can get them in within 4-6days (big cost in shipping) or 4-8weeks (little cost, big shipping time)

i to have been looking for rims but im having difficulty finding anyone who imports them without taking a ridiculous commission... you say you can get most rims? can you if possible pm me how much you would charge to import:

(sets of 4 without tyres)

wed sport sa70's (18inch)

origin DNA 02's (17inch)

work xt7's (18inch)

i dont care how long shipping would take...prefer a lower cost

thanks

Edited by The_Hunster

Yep the ones 'autoworx' posted is what I'm after.

SA-70 in Black Chrome 18". Thanks for making it discrete. lol. But PM if you can get me a price on them. :D

Got some spare Volk GTP's at home (which we're also selling), which I might put on for Motorvation submissions if I can't get these SA-70's in time.

Most of the money is here, people who know me know I don't time waste. :(

Edited by Magic
Magic have you tried Danny at imports101 i know he can get some weds sports wheels give him a call. :(

Nar man I havn't, I got my 34 from him last december. I'll shoot him an email and see what he can do, didn't know they could get parts too. Thanks. :D

Yeah Nengun have it priced good. Thing is I need them within 2 months. I'll be on holiday late oct-november. Danny/Imports 101 has given me a decent price although I lose about $500-600 for being impatient. I might contact Nengun to see if they can keep their 'usually'14 day delivery though, which i doubt.

Edited by Magic
Yeah Nengun have it priced good. Thing is I need them within 2 months. I'll be on holiday late oct-november. Danny/Imports 101 has given me a decent price although I lose about $500-600 for being impatient. I might contact Nengun to see if they can keep their 'usually'14 day delivery though, which i doubt.

Well 2 months is 60 days ... you should be ok.

Why would you give anyone 600 dollars more for something your not overly in a rush for?

Yeah, but I just don't want Nengun being Nengun and sending it like 432483209 days later.

Quote from Nengun: "We do not keep wheels in stock, due to the manufacturing process it can take up to 2 months or more. In some cases 5 months for Rays wheels to be made up. Please take this into account before placing your order. After placing your order you are provided with a Automated shipment date. This time of arrival has no relation when concerning wheels."

Upon saying that, I will consider them still, just need to think about it.

Can someone help with the offset please? Would +36 or +42 be a better fit for r34 front with 8" width? And +20 or +32 for rear with 9"width? I know it's gonna have to be a tight fit.. I think +36 for front and +32 for the rear with 9" width but I want to be sure. Thanks. :)

Edited by Magic

Thanks man, so 8+36 at the front and 9+32 on the rear should fit..hopefully. lol.

Also are the 5 ppl that pm'd me saying they can get them for me still trying to get me a price on them? Let me know. Cheers.

Edited by Magic
Yeah, but I just don't want Nengun being Nengun and sending it like 432483209 days later.

Quote from Nengun: "We do not keep wheels in stock, due to the manufacturing process it can take up to 2 months or more. In some cases 5 months for Rays wheels to be made up. Please take this into account before placing your order. After placing your order you are provided with a Automated shipment date. This time of arrival has no relation when concerning wheels."

Upon saying that, I will consider them still, just need to think about it.

Can someone help with the offset please? Would +36 or +42 be a better fit for r34 front with 8" width? And +20 or +32 for rear with 9"width? I know it's gonna have to be a tight fit.. I think +36 for front and +32 for the rear with 9" width but I want to be sure. Thanks. :thumbsup:

Ok.

Nengun - rather large company located directly in Japan with direct links to manufacturers.

How are these 5 people that pm'd you going to be able to source these rims any quicker if Wedsport have none in stock?

Suggestion - email nengun and ask for an ETA before you order.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...