Jump to content
SAU Community

Recommended Posts

and I bet the powerfc is tuned for full power only, and none of the cruise, low or medium load have been touched.

Thats what tuners do these days, on the dyno, do the full power curve, and then charge some poor prick $800.

mate it very wel could be the tune, but i dont think the person who tuned it wouldnt have taken his time doing it properly. it was a reputable workshop. and the car was tuned last about 6 months ago. and hasnt had any new modifications. plus if it was the tune, why would it have been fine for the last 6 months, and only start fowling plugs in a day, after the last service?

only thing, other then the fuel pressure reg (working fine), that i can think of that could cause this sudden offset is the new o2 sensor? but can a o2 sensor cauz plugs to fowel up that bad?

will have a look for vacuum leaks. however, cars idle is stable and doesnt miss (prior to fowling plugs), and holds boost fine

ALso, i discovered i had a tiny hole on the hose going into the fuel filter, which i have now fixed. any chance that could have contributed?

yeh this weekend, im gna borrow my mates afm and o2 sensor, and see if the spark plugs fowel up. if they do, then ill book her in for a touch up tune on monday. just wanna eliminate all possibilities before i spend money at a tuner

Don't mean to sound like a tosser, but what do the plugs look like? Been around since T-rex, but check this. Take a pic of your plugs, post it up for comments.

From my experiences, plugs in a modern car have to be obscenely dirty to cause a dodegy idle, maybe tis something else.

Edited by GeeTR

so the regs not holding pressuere by this statement or is holding too much

Does it blow a cloud of smoke on idle if you free rev once warm?

If so, fuel reg is 99% the culprit :(

Just get another and off you go.

Can also be checked when driving if you have a fuel pressure gauge and feed it out under the bonnet

OK WELL ill explain exactly what happened today. i instaled new plugs and changed the o2 sensor. car was driing/idling fine, no misses etc. as soon as i gave it a hit on high boost (0.9bar). few streets away from mine. when i parked the car, it began to miss on idle (all plugs fowled again). im heading towards a tune issue, but i wanna cover al other possible culprits, so i dont have to spend too much money at the workshop, incase its not tune related

you guys were right, it was the tune. it seems the previous tune was tuned for the faulty o2 sensor, so when replaced with the new o2 sensor, it ran extremely rich and kept fowling the plugs. got a retune done today and all seems to be sweet :P

thanks for ur help, greatly appreciated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...