Jump to content
SAU Community

Mark Berry Breaks Mt Cotton Hillclimb Record

giant

By giant,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Nismo_Boy Grand Master

Nismo_Boy

Posted
Posted (edited)

Far out, ridiculously quick time! Congrats Mark and Russ

great to see someone go out there and put Mike Collin's WRX in its place finally! hehe but it is an awesome car and he knows that place like the back of his hand. so it really is an awesome effort to run those times for people who aren't that familiar with the track - it is a very technical little course.

That STi is an awesome package, I can see Michael pulling out all stops for the next round to try and break the 42.72 however. Will make for some interesting racing :P

Edited by Nismo_Boy
giant Mentor

giant

Posted
  • Author
Posted (edited)

yes, i am sure michael will be trying pretty hard to get the record back, but i was talking to him and he is building a pro class off road buggy too which is keeping him busy also.

michaels car is an awsome machine and he drives it super hard!

interestingly , we put a set on avons on the car for one run and took them back off as they werent upto it for our car, it appears the car is to heavy for them and they move around heaps on the sidewall which was costing time, we also noticed this at the maryborough sprints but didnt worry about changing them back .

i have a picture at home which i'll post and show you what the sidewalls were doing

Edited by giant
zebra Grand Master

zebra

Posted
Posted
this shows the r35 sliding

it is beautifully balanced!

Were You guys there running later in the night? I was over the road at Willowbank....should have gone for look if i knew you guys had the R35 there.

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

just saw the results. official record for the AWD class is now 43.08 by Mark and 5th outright!!! There were 9 open wheelers there, so that's just an incredible result! Mark ran the 42.72 in the top six shootout at the end of the day - but that run doesn't count towards your finishing position or class records because not everyone gets the extra run. I guess you guys will have to go back and lower that record again!

let us know in advance next time you guys go there!!!

GUN_METAL_GTR32 Grand Master

GUN_METAL_GTR32

Posted
Posted
On the weekend I just did an Audi R8 day down at Phillip Island and we put the clock to a couple of laps and got a 1.50.0 and a 1.50.2 which I can tell you I found staggering in a stock prodution car on street tyres. Apparently the race dude they had there (Christian Murchison) had done a high 1.48 earlier in the week.

Now I reckon one of the factors for such a great time was the DSG gearbox - it sure was impressive to use around the track - you can even downshift midcorner without the car so much as flinching. Awesome stuff.

And yet scary to think in Top Gear the R35 was roughly 5s per lap around the test track faster than the R8.....

how can i get into one of these r8 track days man, id love to go down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...