Jump to content
SAU Community

Rb25/30 Neo

drgnball34

By drgnball34,
in Engines & Forced Induction

 Share

Recommended Posts

unique1 Mentor

unique1

Posted
Posted

nice build, cant wait to see results :thumbsup:

i also run the npc twin plate and its the best clutch for the power it handles, i've drivin extreme single plates, os giken twin and quad plates and direct clutches and they are all nothing compared to the smoothness and nice soft pedal feel of the NPC. Ive done tonnes of launches with 420kw+ (In 4wd) and never had an issue with slipping either :D

  • 2 months later...
  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

drgnball34 Rising Star

drgnball34

Posted
  • Author
Posted

post-27445-1235737124_thumb.jpg

It took awhile but she's finally tuned. Set to 21psi for the mean time as this is the minimum boost we can get it down too.Torque is over 2000ft/lbs. I will eventually run up to 24+psi if pump fuel/gearbox allows. Right now im "TRYING" to handle the power as best as i can. All i can say is god dam fark!!!! Its insane! The most atm is 1/2 throttle in third gear. Absolutely no traction at all. As soon as the gate cracks it just smokes the tyres but hell is fun to drive. VERY dangerous and unpredictable. Cheers to all the boys at topracing. Did a great job and i will highly recommend them.

Mitchee Proficient

Mitchee

Posted
Posted

That would be tractive effort, not torque.

"The tractive effort is obtained by multiplying the torque by the total ratio of power train and dividing this sum by the rolling radius of the driving tyres."

Show us a torque graph, and we can tell you approximately the 'real world' torque values.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...