Jump to content
SAU Community

R32 Gtst Front Guards. Clear Vt Indicators!

Bennett
 Share

Recommended Posts

Bennett Mentor

Bennett

Posted
Posted

Item: Drivers side front guard in white

Age: 15 years

Condition: Perfect

Price: $100

To Fit: (What car) R32 gtst

Location: Eastern suburbs of melbourne

Contact: Here or PM me

Comments: Perfect condition, selling as the other side got damaged and i bought a pair. Comes with an orange VT indicator.

Item: Passenger side front guard in white

Age: 15 years

Condition: Slight damage at front, easily fixable.

Price: $20

To Fit: (What car) R32 gtst

Location: Eastern suburbs of melbourne

Contact: Here or PM me

Comments: Selling as i bought a new pair. Comes with an orange VT indicator.

Item: Pair of clear side VT indicators

Age: 8 years

Condition: Broken clips on back but stick them on with 3M anyway.

Price: $20 for both + postage

To Fit: (What car) Anything

Location: Eastern suburbs of melbourne

Contact: Here or PM me (ask for photos if you dont know wat they look like)

Comments: Replace your crap looking compliance side indicators with sexy VT clear ones. Selling as my new guards dont have any holes for them.

Drivers side guard:

post-42444-1217914392_thumb.jpg

Passenger side guard:

post-42444-1217914425_thumb.jpg

post-42444-1217914460_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...