Jump to content
SAU Community

Stock Boost

SLY-25T

By SLY-25T,
in Engines & Forced Induction

 Share

Recommended Posts

SLY-25T Mentor

SLY-25T

Posted
Posted

hey all

prob a stupid question and been answered a million times b4 but i still wana ask.

my r33 is completely stock apart from catback exhaust, bov and K&N pod

ive read in a few places that in a stock condition, they have a dual stage boost with max at 7psi. but wen i put my foot down, on the stock boost gauge, the needle does not shift past the halfway mark, around 3.5-4 psi.

i dont really understand this so any help would be greatly appreciated

thanks

Jaye

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/
Share on other sites
HuH Community Regular

HuH

Posted
Posted

The stock guage on your dash isn't in PSI, it's in mmHg. That +7 reading right at the top is the equivalent of about 1 BAR boost (which is around 14 PSI).

So halfway up the guage is around the 7 PSI mark, which would be correct.

That's my understanding anyway.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059363
Share on other sites
SLY-25T Mentor

SLY-25T

Posted
  • Author
Posted (edited)
The stock guage on your dash isn't in PSI, it's in mmHg. That +7 reading right at the top is the equivalent of about 1 BAR boost (which is around 14 PSI).

So halfway up the guage is around the 7 PSI mark, which would be correct.

That's my understanding anyway.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

thanx ryan. feel like a n00b, hahaha. ah well

Edited by auss13
Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059382
Share on other sites
phatlavish Mentor

phatlavish

Posted
Posted
The stock guage on your dash isn't in PSI, it's in mmHg. That +7 reading right at the top is the equivalent of about 1 BAR boost (which is around 14 PSI).

So halfway up the guage is around the 7 PSI mark, which would be correct.

That's my understanding anyway.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

yep, 10psi is the standard boost on R32s

factory boost is .7 bar thats whats on the dash

R33 factory boost is 7psi, 0.7bar is just over 10psi which is not right

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059517
Share on other sites
JAS-25T Grand Master

JAS-25T

Posted
Posted

Standard boost in a R33 GTS-t is 5psi untill 4500rpm then changes to 7psi to redline. This is controlled by the ECU and standard boost controller fitted to the car.

Standard boost in a R32 GTS-t is 10psi. I believe this is actuator controlled........without a standard EBC. Happy to be corrected on that.

Another question - I remember reading somewhere that the stock boost for an R32 GTS-t is 10 PSI. Can anyone tell me if that's in fact true? It sounds high for standard boost.

Not high for standard at all.

EVO's run around 19psi standard, dependant on model.

For everyones reference.

1bar = 100kPa (kilopascals) = 14.5PSI (pounds per square inch) = 750mmHg = 0.9869233 Atmosphere's

The stock R33 GTS-t gauge is actually in x100mmHg (millimeters of Mercury).

Therefore, if the highest mark is 700mmHg your halfway mark on the standard gauge is 350mmHG which is equal to 6.77PSI....rounded........ close enough to 7PSI considering the marks on the gauge are only as accurate as the smallest unit which is each quarter, off memory, and that it actually goes just over halfway when at full boost.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059592
Share on other sites
HuH Community Regular

HuH

Posted
Posted

So that's basically an expanded version of what I said in the first reply. :) Happy to help auss13.

I didn't realise the EVOs ran such high boost from factory. I was saying that 10 was high in comparison to other Skylines as well as WRXs and such.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059690
Share on other sites
JAS-25T Grand Master

JAS-25T

Posted
Posted
So that's basically an expanded version of what I said in the first reply. :thumbsup: Happy to help auss13.

I didn't realise the EVOs ran such high boost from factory. I was saying that 10 was high in comparison to other Skylines as well as WRXs and such.

WRX's Last I knew ran 14psi? newer models probably vary.

I expanded on yours because the units were incorrect.

Link to comment
https://www.sau.com.au/forums/topic/231109-stock-boost/#findComment-4059980
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • joshuaho96
      Coolant leak?

      By joshuaho96 · Posted

      Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...