Jump to content
SAU Community

Recommended Posts

I know I say this all the time but :google:... For a street/track tyre for the right price you cant go past the Federal 595RS-R - Street legal semi slick with 140 treadwear rating (which is lower than Falken and Bridgestone alternatives)... I use them as a daily driven tyre and can easily get up to 20 - 25,000kms from a set looking after them.

what are they like in the wet though?

how much per corner in what size?

Thanks for the info. Could you please tell me how much a set are and where i can source them in Melbourne. Looking at 18" to suit R34 rims. Would you recommend 45's or 35's ? Cheers.

I know I say this all the time but :P... For a street/track tyre for the right price you cant go past the Federal 595RS-R - Street legal semi slick with 140 treadwear rating (which is lower than Falken and Bridgestone alternatives)... I use them as a daily driven tyre and can easily get up to 20 - 25,000kms from a set looking after them.
I know I say this all the time but :(... For a street/track tyre for the right price you cant go past the Federal 595RS-R - Street legal semi slick with 140 treadwear rating (which is lower than Falken and Bridgestone alternatives)... I use them as a daily driven tyre and can easily get up to 20 - 25,000kms from a set looking after them.

RE-01Rs have a UTQG of 140 on some sizes. Bridgestones also don't have the same anecdotal reputation of delaminating under hard use. I know you commented in that thread, but Tim's not the only guy I've seen rip apart Federals at a track day.

To be fair (since I know you're quite touchy on the subject) I'm not disputing that you, your mates, and those drifters you mention don't destroy their Federals and that you're not guaranteed to blow out a Federal under hard use. The fact that a noticable minority do still indicates a certain level quality control compared to other brands who don't get the same comments from customers. All I'm saying is that its a comparative risk. But, since practically everyone here modifies their cars and exceeds the manufacturer's recommendations that risk may not be a deterrant.

However, Federals tend to be significantly cheaper than the alternatives. For street only use I would personally consider them.

Like other people have said, I'd prefer to run specific track rubber and dedicated street tyres. Heat cycling your tyres after a track day makes them rubbish when cold, so even if you have plenty of rubber left above the indicators the tyres will won't grip the same.

what are they like in the wet though?

how much per corner in what size?

Compared to other semi slicks on the market, they're quite good in the wet... I find them quite predictable as long as you remember that you're driving on a semi slick tyre.

Have a look on the www.federaltyres.com.au for your local dealer, they can give you a price fitted an balanced.

Thanks for the info. Could you please tell me how much a set are and where i can source them in Melbourne. Looking at 18" to suit R34 rims. Would you recommend 45's or 35's ? Cheers.

I cant quote you any prices on here but try the "dealer locator" function on the website (above), I would probably recommend 255/35R18's.

RE-01Rs have a UTQG of 140 on some sizes. Bridgestones also don't have the same anecdotal reputation of delaminating under hard use. I know you commented in that thread, but Tim's not the only guy I've seen rip apart Federals at a track day.

To be fair (since I know you're quite touchy on the subject) I'm not disputing that you, your mates, and those drifters you mention don't destroy their Federals and that you're not guaranteed to blow out a Federal under hard use. The fact that a noticable minority do still indicates a certain level quality control compared to other brands who don't get the same comments from customers. All I'm saying is that its a comparative risk. But, since practically everyone here modifies their cars and exceeds the manufacturer's recommendations that risk may not be a deterrant.

However, Federals tend to be significantly cheaper than the alternatives. For street only use I would personally consider them.

Like other people have said, I'd prefer to run specific track rubber and dedicated street tyres. Heat cycling your tyres after a track day makes them rubbish when cold, so even if you have plenty of rubber left above the indicators the tyres will won't grip the same.

I understand that there are always going to be people who have a bad run with Federals because there are people who have a bad run with ANY brand of tyre, I have personally talked to dozens of people who have been very unhappy with other brands (that I wont mention) aswell as people who have been unhappy with Federal, I can be almost certain that I have heard just about every story there is when it comes to tyres delaminating, wearing unevenly, punctures etc. as it is my job to constantly research the market and find out what is happening in the world of tyres (I work for the national importer/distributor for Federal Tyres).

You might say that I am touchy on this subject, but I prefer to say that I am simply putting to rest any myths, rumours or uneducated opinions that arise due to bad experiences with the tyres, too often someone will make a statement that a certain tyre is badly made and has low quality control when they havent done their homework and inturn other people jump on the band wagon and start rubbishing the brand... Thats how bad brand perception starts, I'm here to make sure that people have the right information. Thats all.

Youre correct in saying that there was an issue with delamination of the 595 series, however - that was the earliest release of the 595's and since then Federal have redesigned the tyre with better tread compounds and casings to help improve the tyres heat resistence.

However - the 595RS and RS-R have always proved to be very reliable on and off the track, I have only ever once seen a delamination on an RS and that was because the tyre was damaged due to hitting the sharp upper edge of a ripple strip at high speed.

Youre welcome to use whatever tyres you like, but you have to realise that there are also other people who like using brands that you dont.

I am a big fan of the federal semi. I have used it for track and found it to be far and away better than the best street tyre. There are semi's that will out do it but, as an all round tyre it cant be beaten. 20/25 kay including track, street and skidpan work Is as much as i am prepared to ask of any tyre, semi or street. Heck if you took wheelspin in to account i am sure the rears have probably done double that. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...