Jump to content
SAU Community

Recommended Posts

Got my r34 gtt a couple of months ago and noticed that the front right parker and one of the rear left stoplight bulbs aren't working so I replaced them.. few days later, the same bulbs are dead again.

what could cause them to die? electrical problem that's gonna be a PITA to diagnose and cost a shitload ? or could it be something simple like a fuse needing replacing ...? Any advice would be appreciated ...

Link to comment
https://www.sau.com.au/forums/topic/231477-electrical-issue-2-bulbs-keep-dying/
Share on other sites

Hiya D,

Got a Multimeter?

Same thing happened to my wife's BM till I changed from one brand to another; and then everything is sweet.

Another Q. Even though you've only had the wheels for a couple of months, were those bulbs behaving themselves & were there any mods that needed to tap into the electricals (such as new alarm/immob. etc)?

I'm not sure when the bulbs died the first time ..may have been like that when i got the car. But yeah I did have an alarm system installed. I'll try a different brand of bulbs like you suggested then if they blow again, off to auto electrician I go I guess.. Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...