Jump to content
SAU Community

Recommended Posts

Hiya,

While putting my car on the dyno the other day, I got them to test the air flow ratios, much to my suprise it's running a bit on the lean side of things (running 98 octane fuel with octane booster).

I know that running too lean can cause detonation, but thats about where my knowledge of the subject ends, so I was hoping someone could shead some light on the subject for me please.

My question is what can I do to get it fueling right. Any one have any ideas where I should start to fix this potential nightmare.

your advice would be appreciated, thanks

Rachael

Link to comment
https://www.sau.com.au/forums/topic/23282-gts25-running-lean/
Share on other sites

Before spending out $$$ on SAFC then finding out changing the setting on SAFC doesn't do anything to improve situation, maybe you should check first whether your fuel pump is heatlhy or about to die, or your injectors are dirty and not flowing enough fuel....

If they're both healthy, go buy SAFC and tune it to richen your A/F at desired rev points.

Rachael - what mods have you got?

I'd be checking anything that feed fuel to the engine, pump, filter, injectors, etc. And I'd be checking anything that measures air flow/volume/pressure as well like the AFM before blowing money on a SAFC. Maybe an ECU reset might help too.

cheers :stupid:

Thanks for the speedy replies guys,

My mods are K&N panel filter, extractors, and 2 1/2" exhaust. The fuel filter was changed 12,000km ago, I generaly change it every 15,000 km. I run injector cleaner through the fuel every few tanks, and the ECU was reset 1000km ago. To be honest I'm a service nut.:crazy:

Righto, the AFM sounds like a good place to start, is it something that can be tested a home or will it need to be done by a mechanic?

thanks

Rach

After talking to a mechanic today, he suggested a fuel pressure regulator would be the best thing to do for a quick fix.

As checking the rest of the system is pretty much a process of deduction, replacing the parts untill the problrm causing culpret is found. (me thinks it's going to get very expensive):D

i hate that

i have to sell all my goodies that will be no use to me with my new engine otherwise ill never even get started. chance are ill sell the goodstuff and never get round to doing the engine and be driving round in nothing more then i a riced up line :D hopefully that wont happen.

AFM = Air Flow Meter

S-AFC = an apexi computer "Super Air Flow Controller" it intercepts the signals from the airflow meter and tricks ur computer into thinking it has either more or less air, givving u the ability to adjust how much fuel the computer gives ur car in return.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...