Jump to content
SAU Community

Recommended Posts

I hear so many people raving about redline oil, but I drove a car the other day with redline lightweight in the g/box and it felt the same as mine... All I am running is a Mobil Fully synthetic gear oil. I thinking that the people that are putting it into their boxes are first time changes since the car has landed from Japan, and even mineral based gear oil feels 100% better then the shit in the gear box that the japs have never changed.

I would like to hear some other peoples opinions on this subject who have tried both oils. I just think its plain rude for people to be asking for $100-110 for 4 liters of oil. That said I paid $52 for 4 liters of mobil fully synth gear oil - which hurt the pocket alot.

Sumo

Link to comment
https://www.sau.com.au/forums/topic/23294-redline-oil-overrated/
Share on other sites

Originally posted by Sumo

I just think its plain rude for people to be asking for $100-110 for 4 liters of oil.

LOL - I paid $75 for 200ml of diff additive for my 2 way :stupid:

But it did the job and I'm happy...

Anyway, I haven't tried Redline yet, but I'm using VMX80 at the moment. It was OK for the first 9 months (better than the goo that was in there), but I'm still not 100% happy with it.

I'll give the redline stuff a go.

The way I look at it is I spend about $60 every 5000km on motor oil and filter, so $100 every 2 years or so for the gearbox is fine.

J

sumo, I've got no particular comment on the "feel" of redline for gear changes. The reason I use it is that the synchros in my box are wearing and it was crunching with my old oil.

Put in the redline, and the crunch is gone! Can't ask for more than that!

I wouldn't suggest that the r33 box is a sweet shifting one at all, it is precise, but long throw and very tight when cold.

If you have a crunch now , then the Castrol will not solve it.

We use the Syntrax as a matter of course when we change the oil at 100,000km in the Sooby's. If it's crunching , it still will.

Put in redline and crunch gone. Can also get them into reverse without having to wait the recommended 3 secs.

I look at it like this

$120 every 10-15,000 km

$1500 to rebuild the box and have the same problem in 50,000 odd kms with spirited driving.

Do the maths...

Cheers

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...