Jump to content
SAU Community

Recommended Posts

go right ahead then, up your pressure 5psi or 10 psi. Then add the rising rate of 1:1 to it. I run 22psi on some days, hmmm, that would give my standard injectors (if they were still fitted) a good, 20psi+ extra pressure. And people with the stock turbos, gonig from 7psi to 13psi, thats an extra 6psi, plus your claimed 5psi or even 10psi. 10psi to 15psi is not only a lot of pressure, but a lot more flow for these 15yo injectors..

You'd rather risk doing that, and blowing your engine, than getting new, fresh injectors?

Do you know how many GTR's and GTS-T's I have seen with stuffed injectors, running at standard pressure? Oh, but you're the expert. My bad.

Edited by The Mafia
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

I won't tune a car with a malpassi FPR now. I turn them away till they put a stock one back on or get a sard or similar

Last one i had on the dyno had 3 different AFR's on 3 power runs in a row... 11.5 12.5 and 13.5 LOL. those damn italians.. they think they are gods gift to the world.

ALSO i would get rid of that ECU. it is shit. Sorry to break the news to you.

yuck.

The last 2 cars I tuned, we had to take them off and bin them.

The AFR's would be from one extreme to another. You go WOT, the AFR's would go to 11:1, not touch the tune, then WOT again on the next run, 13:1. Put the standard one on, and AFR's would hold perfect.

They are junk.

have you found any info about the latency of your injectors yet chris?>

Nothing that refutes the info my current tune is based off unfortunately. Ah well, loving the flames for the moment! My fuel efficiency sucks though >.<

from what i have heard... but it depends on where you want to take the car...

for the 300 rwkw you mentioned you'll want a better ecu, bigger turbo (hks 3037 pro s or similar), injectors, fuel pump, Z32 afm OR map sensor'd ecu, cams are an option and then you'll be dancing around the limits of the stock engine.

300 rwkw is expensive in gtst form...

stick to 250-280 tops imho

280 is pretty good tho right? hmm alright...

i have heard good things about Power FC and also Wolf seems to have a few ppl happy with it..

what do you guys recommend?

Also will the SARD 550CC injectors do well with the power i want to reach?

Edited by palmer

yeah the 550's will be fine but as previously stated bombtrack is having latency issues with his... they are shooting fuel for too long and makin teh massif flames...

nismo 555's are probbaly the easiest option

power fc > wolf

haltech also a good ecu option...

ok

so get some Nismo 555 injectors, Z32 AFM, maybe some Cams and see how it runs with the EMS Stinger at the moment... if im happy ill leave it... if not sell the Stinger and get a Haltech or the Power FC

what fuel pump would be a good option?

the EMS stinger is a map sensor ecu so you wont need the Z32 AFM.

Just get the injectors turbo and see how you go with your ecu. if you like your engine and want it to last id get something else.

But try your luck. a new engine is only $1500

:D

Do you know how many GTR's and GTS-T's I have seen with stuffed injectors, running at standard pressure? Oh, but you're the expert. My bad.

I post this;

Discussing this with you seems pointless since you have nothing of substance to argue with.

Then you post this. You're blind, and possibly stupid.

I won't tune a car with a malpassi FPR now. I turn them away till they put a stock one back on or get a sard or similar

Last one i had on the dyno had 3 different AFR's on 3 power runs in a row... 11.5 12.5 and 13.5 LOL. those damn italians.. they think they are gods gift to the world.

I said exactly this about 10 posts back, and agree with you 100% Guilt-Toy, I refuse to tune cars with them installed because they completely waste my time trying to diagnose fuel pressure problems.

Factory ones work fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...